Search results

Interesting...My system autoloaded 4.07 from 4.06...it works at least though getting a sucessful handshake always takes multiple tries depending on location...my theory is that gs has to broadcast that complex serial # to wkm and get a reply...The odd behavior I am seeing is what I call the...

while in gs mode ,my hex obeys all commands except one click takeoff is really scary..it wobbles arround and if terrain is at all rough it will tipp over..man takeoff no prob just power it straight up...2 issue..is while in click and go mode..aircraft travels correctly (both speed and...

Hey thanks for both replys..didnt see the link for the video Ferdinand...I still believe this is software problem...The two radios have to be communicating because before I link up I can push aircraft position and the ground station program brings up correct position on map.This occurred when I...

Thankyou...first of all mybsystem was not an upgrade...the wkm,lkm 900 etc was new from arizona distributer and hand picked up from them by my dealer and than shipped to me 3 weeks ago.I had to remove google from host files to get program to come up.Serial # is visable along with one waypoint...

Last nights test still shows difficulty connecting with the dreaded no permission statement.I think gtranquilla is correct about the ground station software not correctly recieving or acting on serial number it recieves from wkm main processor.In my case the first time it connected up after two...

gtranquilla..try Beldin 300 series..50 ohm compatible/double shielded..half the loss of rg 58...I domt know where i got the belkin 9000 from..a faulty memory maybe...anyway Last year I strung 500 ft total while moderizing my shack....thanks for advice to complete ham radio course...I can always...

I wouldnt trust a repaired esc..they are not that expensive..something like 40 bucks...you have way more than that invested k

Either the WKM microprocessor or ground control software...all firewalls/anti virus etc are turned off and windows shows the driver and says its ok..k

Flir makes the cheaper alpha series...still starting at 1800 but does not output pal or ntsc...still too much..kpc

1000 for tau 640???Try about 3 to 4 k depending on lenses...very expensive for hobby use only...kpc

Thanks for reply...in an attempt to boost voltage..I have a 5 volt "dumb" usb charger up on the tripod with the supplied USB pigtail plugged into that.That should eliminate voltage drop over 10 cable run as it is up by the transmitter.Your suggustion of data signal drop out over the extended run...

Anyone having connection problems with lmk 900 data links...most of the time I get no permission message at the end of the handshake.Position of aircraft on map always comes thru though.I am using a 9 ft extension cable to get lmk 900 unit up on a tripod away from the laptop.Got it to connect...

Test flew today...big issue is I keep getting a NO PERMISSON notice on connecting.Distance to s800 about 30 meters...It appears it cannot complete the handshake.attemps are successful maybe 5% of time...thats out of a hundred trys.Got it to connect once today while bird was in the air about 50...

thankyou arial media pros for basic solution to program installation error...it worked for me.The real question is how do you load google map on line...save it for offline use later in the field??Usb faulty plug ca be checked for proper data/power pinouts with a multimeter...sinc kp couch

# days huh??Mine has taken about a solid week of debugging new s800/wkm/iosd/900 lmk....down to last few issues I think...The thing I do not quite understand is offline use.Typically I would have internet access at home and than drive somewhere i plan to operate .If I understand this..you open...

Thank so much...Dji patch did not help....removing google from host file (i used the recycle bin)did the trick!!kpc

Welcome to this madness

I just recieved wkm with 900mhz data link.During installation of GS guess what??same thing happened to me..couldnt get it running on three different computers over three days..than I found this forum...I will try again this evening...DJI also just responded with their patch...oh by the...