Search results

I just got mine setup last night. I can now see the issues many have had with stripping servos and the confusion of set up. But the new instructions prevented me from making these errors. it still needs some refinement in the manual but at the end of the day I didnt make any mistakes and it...

1001 Copters, I have my Xaircraft 650 with KK control running on (8) 4120 Axis and am wondering if i can lift the Skyline gyro? I dont have a gimbal but would like to just lift the skyline to make it look more professional. I dont intend to use a camera with this rig as it is just for FPV, so...

Has anyone tried both powering the servos from the skyline vs. direct power to servos from the BEC? I am curious if there is any less feedback when powered separately.

absolutely. Thats a great match up.

I am on 5.06 still and this is the yaw twitch I have been complaining about. This is flying in Atti mode, No GPS at all but signal is very good where I live.

When you use the GPS, do you need to swap all your Rx wires to that board? I always wondered about that. Whats the point in them being there otherwise? Oh, Bart, dont forget to plug in the GPS wire to your rx! I have looked into the future. :)

bwa bwah

I'm not sure if it works this way but if I use a 40amp esc and my motors have a max draw of 42 amps, will the motor only see what the ESC is capable of providing or will it fry the ESC trying to overload it? If the hover draw is half of the capacity of the ESC I would think i am fine but I...

I wondered if that would work as well. Connect a small 2s battery to the esc's first. I know the maytech escs held a charge for a few minutes. not sure if they all do it.

The guy is kinda a weirdo. I might just throw them out and buy some OS max brushless motors.

I was just seeing if anyone else has had this issue or if there was potentially something else to blame that I wasn't thinking of.

how do you plan on flying it if you cant even get into the assistant software? first things first, get the driver installed!! I use bootcamp on my mac with windows 7 and have no issues at all. Do you need a link to DJI's site?

tiger/QC/avrotos only take 4s. And the AXI's are definitely not made by tiger! They are in a league of their own.

I dont know what dead stick means in this case, normally that means flying without power in a plane and gliding in. But I think you are activating hover failsafe somehow. Take a look under the fail safe options and it will say hover or return home. In hover mode it just hovers in place...

Chris, I'm going to guess that it's either those ESC's you got or the radio. You did mention that you had yaw issues on both radios even on the Xaircraft right? Maybe there is an erratic signal being produced by the tx? At the same time, there is always that 1 in 1000. :)

Testing X8 for first time today, 1 of the 8 motors had spasms instead of ever turning. They are Tiger 2814/770. I plugged the bad motor into another esc and it still didnt work. I plugged another motor into the esc that was powering the bad motor and it turns fine. I re calibrated throttle...

What motors on that cs8? I just got a bad tiger motor for the first time. I'll try not to freak out and go impulsively buy some AXI's.

Given that this hobby is predominantly males and males are statistically more color blind than women, don't you think the color coded motor schedule should be changed? I had to ask my wife about the yellow/green as i wasn't sure. I know there is a pattern to the layout but it's just another...

Good to know. I figured from the gain instructions that the only signal it was interested in was the +/- . "when the Channel 5 or Primary Gain switch is in the negative position then the Auto-Leveling Mode is disabled and a Primary Gain of 25 is used by the HoverCore™ algorithm. When the...

Ben, i would definitely plan on upgrading motors before anything. The 2814 would be pulling a lot of amps with that load. if I were to do it i would go 4120 or the model right below it, cant remember the series number.