Search results

Congratulations!! How did they find it and how does it work, do you give them a one time use or sell the rights to them? Nice shot by the way, very vibrant. tom

http://www.bhphotovideo.com/c/product/652385-REG/Canon_4076B001_AVC_DC400ST_Stereo_AV_Cable.html looks like the same cable you posted Malcr001. They are very fragile and stick out the side of the camera a lot which may mess with your gimbal setup, maybe look for a 90 degree HDMI to VGA...

You could, it'll take less than a half an hour but you'll have to take it apart to get your electronics soldered. Keep saving until you can buy a rtf kit or keep your eyes peeled in classifieds for parts as they come up.

yeah it's pretty vague :black_eyed:. have fun, they're a HOOT!!

http://www.mcmaster.com/#copper/=hi5w7v May have to cut your own, not sure what shipping to Cypress would be but they ship fast here in the states and cheap too.

The slow blinking orange light means you're in ATTI mode (which is what you want for takeoff), you'll get no blinking light in manual mode (which is much harder to takeoff in). Hi Ed, anymore flights with the s800?

If the white arms are your front, it looks like your Naza is mounted sideways. It should be dead center and properly facing forward (the end that has the f1 and f2 plugs is the front)

This doesn't sound like the Hollywood I know, stunt coordinators don't sign the checks. Congratulations on your gig though!

Yeah, I don't understand it either. Twelve gauge (common size for battery cable) wire is only meant to carry 20 amps. I think if guys were to run these 60-80 amps they seem to be getting with their builds, I fear the connector from the batt would melt before the pdb would fail. Just cuzz you...

What the **** are you doing rebranding MY videos for your own personal gain? You've been reported on both stolen videos.

Wow, the little douchebag stole mine too. Reported to Youtube.

from what I read on the innerwebz, plenty of places to find lipo info with safety precautions and what not. I have a 450 w/naza but I only have 3s batts and I use the low voltage safety in the naza. When it decides I'm being ignorant for disregarding its fast blinking red light, it sits itself...

I think a lot of guys just turn off the batt monitor and go with the timer on their TX. Especially if they're swapping between 3s and 4s and don't want to recalibrate their batts for the low voltage to work. Set your Tx timer for 6 minutes and start it from the time you FIRST plug in your...

I didn't post this one with my other nab vids because Tabb posted his own vid saying the same thing almost word for word, and frankly at the time I didn't realize it was a whole new system. They're supposed to have their own FC coming out too. One of the things that surprised me was that none...