Search results

  1. SMP

    Aeroxcraft Brushless Gopro Gimbal

    Not sure how big the gimbal is but... We have the musky gimbal which is fairly large; fits Nex/550D and was too big to get full 30 degree roll with my Aeroxcraft landing gear on the 550. We ended up buying two sets of LG from Quadframe.us - the 215 and 300. Turns out the 215 was a perfect fit...
  2. SMP

    Share your Ground Station(s) here!!

    We recently completely rebuilt our ground stations going from two 10" monitors in separate boxes to a consolidated two 8" monitors in a single box. We used the Foxtech FPV monitors. http://www.foxtechfpv.com/foxtech-m800-8-monitor-p-644.html I'm a critic and we've gone through tons of monitors...
  3. SMP

    Video Link Advice for Y6 AP Work

    We use Immersion RC Duos for the 2.4 and 5.8 rigs - Paired with Fatshark Dominator goggles. :) Immersion is never in stock, grab it when you can. We also have a small non diversity Lawmate 2.4 which we'll be adding and we use the good old Hobby King receivers x 2 for 1.3. Droider, for...
  4. SMP

    Skyjib motor temperatures

    THANKS Lanzar!!
  5. SMP

    Hoverfly Magnetic declination

    Thanks!!! Good site!
  6. SMP

    HD video tx

    Teradek range too short, too heavy, too spendy - Paralink too intermittent. Good luck! Subscribed
  7. SMP

    Skyjib motor temperatures

    On our Flat Skyjib we see variations but typically between cw and ccw - generally 7-8 degrees C. We use a heat gun and measure 40C +/- on the cooler side and 50C +/- on the warmer side. How hot is hot? Don't know if its related to your issue but we spent a LOT of time making sure motors were...
  8. SMP

    GotHeliRC.com GoPro3 Brushless Gimbal "VectorDD from ViaCopter"

    Gotheli - Are you going to be getting the TBS Front mount version of this guy by chance??
  9. SMP

    New video antenna option

    Heya Bart, Aye, flying the IBCrazy Ultras on 1.3, 2.4 and 5.8! Was going NUTZ trying to figure out the difference between the bluebeams, mad mushrooms and cloverleafs forever. Finally found out that the "Ultras" are basically a set comprising of 1 Cloverleaf TX and 1 Mad Mushroom RX and are...
  10. SMP

    Naza acting weird. Crashed my 3500 dollar setup with naza gps today

    Not to digress but I'm betting you're VERY heavy. I'm running an octo coax 2814's, two6000mah, AV200/360 with Xoar 12x5 Carbons and dropping when I switch to manual. Have you switched to manual at 50% throttle while hovering to check??
  11. SMP

    Foldable and/or Backpack Rigs!

    Drat... "Add to cart" Thanks Pete!!
  12. SMP

    3D printed brushless Gimbals - Info exchange

    Yeah, sorry bout that mate.. Took me a bit to figure out you needed to have an account before you could get anywhere... Doh!! Got a chuckle... Looks like the beach bars on my bike. Good luck parking that thing ;) ;) (Gimbal looks nice though) ;)
  13. SMP

    Dji iOSD Application Good News if you own one..

    Just installed the iOSD on two birds, very interested in your App! Unfortunately I'm the opposite of the chaps above. "Stone Cold Idiot Proofing Guy". If I can use it, EVERYONE can!
  14. SMP

    CS8 to X8 conversion - Herkules ESC III V3

    Thx mate, you know how it is... if only I knew then what i know now kinda thing ;) Thats great news!
  15. SMP

    Another 3 axis brushless

    Heard the same thing when guys started trying to crack the 1200g (DSLR) limit...then it got quiet and haven't seen people bringing it up again....
  16. SMP

    Foldable and/or Backpack Rigs!

    Whaaaaaa..... Are those little mini retracts???!?! Badass Pete!! Where'd you find those! Aye Chris, went back and forth as I REALLLLLLLY like the Kratos but at 850Eu for the foldable X8 I had to jump in. His gimbal stuff is even more sick!! Plus Ferdinand is running it w some low KV w monster...
  17. SMP

    Anyone using the Martinez board

    Thanks guys!! - "add to cart" finger seems to be working fine!
  18. SMP

    New generation brushless gimbal motors

    ^^ Might want to see if Denny chimes in - I know hes wound his own motors and has played with custom windings and specific Ohm.
  19. SMP

    SunnySky Motors in a Y6 looking for some quick answers...

    Make sure you get the Grubscrew prop adapters BEFORE a prop starts slipping - <---Killed the Disco with a loose prop
Top