Search results

Any idea what the Alware MD260 servos are? I had the same question. Could not find anything on google either. NV.. I found it at alwarerc shop.

Just paypal'd.. Thanks Bordhead!!

Could Explorer do a dual pack? would essentially add weight and extend run time.

@ Explororcam, yes, 3.89v per cell.. have 4 cell so that is about 15.56. I believe you only get longer run's with you increase your mah, not Cell Counts. Increasing cell outs from 3s to 4s will essentially allow your ESC/Motors to be able to pull more if needed and not run the battery hot...

I am ready to paypal.. PM me when you decide you have waited to long..

I get 8-10mins with the standard DJI plastic 8" with 4s 4000mah. When it lands, I check my volt and get about 3.89v. I tried once going down to 3.68.. but I think I messed up that pack now.

@ Bella7821 Seems like that link only has the 10x5 Reverse.. am I just not finding the other rotation of 10x5? KS

I will let you know what those props are like.. I just order 10 pairs... backup in case..:) I will only need 4-5 pairs.. for Hexa.. so I may want to get rid of the others. If you are planning on getting some, hit me up.. I will have mine shortly. I will also do a video on same Hexa test with...

oops you are right.. how about this one? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=221087264568&ssPageName=STRK:MESE:IT#ht_2250wt_1022 Let me know what you end up with. I am on 4S and ran both my DJI 8" and DJI 10". Both seem to work fine for me. I am going to be adding a Alware...

@ Explorocam, I also am wanting to upgrade my props.. but can see that the thickness of the blades may cause and issue. Some of the props I see, comes with some rubber washers.. I have not gotten while still reading and learning.. but I am sorta' glad you brought that up. Didn't your props...

Bella, Bingo.. you are the best.. this is the first I have heard. I set to calibration where the blue was suppose to be.. then I lightly press on the rubber bubble.. till the blue lit up. It took a couple of bit to get the blue to stay lit. Has yours come back off? Regards, KS

Yes, I agree @ Dewster.. though I ended up getting 2 WKM, and 1 NAZA.. the WKM has the ability to do both, so, if it was in a crave for a quick flight with just the hex and the TX, then the WKM would work.. then on days that I had all day to just tinker, test, play.. I could take the laptop...

I have a F550, no gimbal, no landing gears on 5.12, seems to be stable with DJI plastic 10" and even more stable with 8" DJI props. RTH has always worked for well and smooth for me. My heart rate only went up when I had the 10" props and it was set to go up 60 meters "I was not expecting"...

I agree with you. I think, it is worth the try to work with DJI to exchange the WKM though.. especially if I am afraid that the effect was the LED going bad, not the problem. so, I am eager to find out what is causing 2 of my LED's to go bad and put that out. I recall, my wife kept on...

I am new, but I have both.. from what I know, the WKM allow for the DJI Datalink /View upgrades. Now that the NAZA has GPS, it appears that from a traditional TX/RX control/flying it is very similar.. Fail-Safe, GPS hover, ATTI flight. I have only use the WKM, my Naza and GPS is in the...

where are you located?

what did you end up doing? or did you just live with it? I use the GPS feature, about 70% of the time and the other is ATTI mode. so, I think the BLUE LED helps create that purple color to tell me GPS status so, it is helpful and I like that purple color.. Thanks for your input. KS

UPDATE: not sure the cause, but reseller told me that DJI wants the unit back and will send a new unit. will update, hope to get some technical info for readers to watch for, but dont hold breath. Will probably just get a working unit and not know what the real issue was. Fine with me, but...

So, got WKM with F550 and FUTABA kit. Billowy 4S 4000mah battery.. fly for about 3 days.. seems to fly fine then, no Green LED during calibration.. What I was expecting was: 1. switch mode 8-10 times go get constant Blue for horizontal calibration. 2. turn on horizontal plane completely...

Have not done any painting or color changed, but if you google for "black rm550" There options.. I personally have not tried but seems like you can get a hell of a deal.. on it from rctimer. hope that helps..