Search results

It rock!.. sure performs like the pros.. what is the investment in materials? I know there is no way to put $$ on time/knowledge.

Wondering if that is a reason why the shims are underneath the motor mounts and not between the ESC and the Arm instead? I can see that the angle of the motors would be effected in control, but if the fix was for heat dissipation, wouldn't it be more effective in ESC heat dissipation between...

I know it has been said that the Calibration process only calibrate GPS, but why would we have that vertical calibration too? Could there be some sort of calibration on that also? or sometime in the GPS/IMU position, verify the - and + numbers.

here is where I mounted 2 of the RCshutters IR remotes. "circled in RED".

took a cheapo BIC Pen.. removed the ink, and some pen, you just have to trim the first few inch off the tip where the ink comes out... Perfect fit around the original mounting.

I just mount it on top of the Zen15 plate... with about 1 inch hanging down on front.. and then my other one is same, but in the back... hanging down. Late here, and will upload image later. KS

RCshutter.com, on the left, choose "RC Shutter System", then find your camera type. the one I picked up was: http://www.rcshutter.com/index.php?route=product/product&path=20_66&product_id=55 Hope this helps you. KS

I got 2 of the IR controller for my NEX7 on my Zenmuse.. works awesome!! plug and play.. I use a servo splitter cable and have both IR on it. One is mounted in front and one in back, in the need to switch while the camera is facing backwards. I may conside what DJI will release, but for...

what is interesting.. I have 2 WKM on a S800.. each numbers are so far off from one another... I use same battery packs.... have not really tried to get the numbers the same.. I have only tried to get the flight characteristic similar.. but the numbers are off big.. should the S800 WKM on same...

wonder if the effect would be degraded range, or something else.. to the WKM or control side? I wouldn't mind degraded range, since I normally only fly LOS. but if it would effect the other electronics, ie.. WKM stuffs.. then it would be something else to consider. KS

so, I have a s800 with zenmuse.. I would like to have a video for the camera operator, but also, I would like to have a camera for the pilot. Reason, I cannot judge distances as well as others. when the camera operators tells me to slide a direction, he may not be seeing the surrounding, but I...

DJI has a video downlink also, any info on that? would it be better to use theirs or go with the Immersion? Thanks again,

Thanks for the info guys.. I am planning on using this: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=22394 Any idea if it will mess with anything on the S800 or Zenmuse? Thanks again for the clarification... KS

Hello Millsy, I know your concerns... but my input: you are getting started, and you will have some accidents. My opinion is that you get a DJI clone.. or perhaps the actual DJI 550 kit. Do a google on "RM550 hexa".. make sure you notice the Version (V1 or V2). These are kits that the body...

Hello all: I am trying use the Zenmuse video transmission port to a HK 5.8 VTX. My question is do the Zenmuse provide the 12V power to the VTX? or is the Zenmuse needing power from the a source? I am using the following VTX...

Got it today!.. works like a charm!!!.. I order 2 and got 2. Wondering if I can plug both into a servo-splitter? Reason is that I have it on a S800/Zen15. The Zen15 spins 360, and I cannot mount the IR on the camera. I only mount it above, enough to trigger when the camera is in the right...

Jon, Was that me? I have not see your mail yet. let me know if you did.. I am still waiting too..:) KS

mine does that same.. after a few turns and roll before flight and set it on sort of level, it seems to work for me. It has always done this since I got it. KS

are you also paying for the paypal fee? KS

Thanks Tim, got it.. updated it.. holes had no effect like you said. Flown several times.. RTH.. all works. Thanks for a wonderful deal!! Now I have a 2nd backup to another backup. KS