Search results

I have an AV130 with stock servos. The pots are on the geared tray, so it isn't direct drive. I will look for an 5K ohm pot. How about watts??

I swapped roll and pitch ports and the pitch keeps overshooting, so it must be the pot. Was looking to get a pot out of my align ds 520, but don't know how without breaking it. On the web I find 10000 of potmeters, but I don't have any clue which one to get. Can you guys give me something what...

This is what I mean with overshooting quite a lot! Crappy quality of my htc desire. I just slowly rotated the camera tray. It does this sometimes, but when I airborne I shouldn't happen EDIT: @ George. The problem is that it is an av130, since Photohigher replies after weeks (if they even...

Will try it, but than my correction will be opposite? (am I missing something?) My tilt is not only overshooting a bit, sometimes it just goes down by 25 degrees, sometimes it doesn't.

I'm getting the idea that it is the pot, but what can I do about it?

I'm also getting some overshooting my tilt point. When I'm flying my tilt can be pointing all the way down for a few seconds and comes back up. How do I get completely of the jitters, I thought it was the skyline, but I'm getting them also with the hoverfly:upset:? When my octo is standing...

I actually got it working, and it works pretty well allready! My pots were indeed wrong installed. StillI got some jitter (much less than skyline though), but I think this might be the the gimbal it self? When it is standing on the desk powered on I can see the tilt lifting up and down just a...

Ok, haven't seen that. How is firmware 0,96 for 2 axis? What about the scaling issue at the tilt axis in that firmware?

I might have a wrong setup, but I allready tried to do some at the pots. I will try again as soon as I finished my school. Didn't exactly follow that manual, did the same as I did on the roll. Will also check this one. Do you get good performance adidas? The last video you posted was kinda off...

I don't know what has gone wrong. I calibrated like it should and set the right orientation. What could've gone wrong? Everything was working ok with the skyline (except for the big jitters) naza also worked fine, but way to slow, so mechanically it would be ok. Do you have any clue if you...

Photohigher isn't telling that much. They only come apologize every once and a while. But the thing that is getting me frustrated most, is that they told me nothing was wrong with it. I have 2 expensive units, and for that big amount of money they don't even work. Potentiometer didn't improve...

Is this a joke?? I just got off the cursed skyline and was convinced this was better, now I'm in the next problem. I even asked hoverfly if there was absolutely no problem with this product, they should have mentioned it!!!:upset: Can't it be the potentiometer? I need to decrease the scaling...

Today I received my hoverflygimbal and am setting it up. For roll I only needed 5min to get it right, but I don't know what is wrong with the tilt axis. I tried a lot of settings, but every time I tilt my octo (hoverfly mounted frontbottom) the tilt tray is going way way faster that my octo is...

That would be my thought, but I have different conectors soldered for the hdmi convertor, so I thought I ask.

I thinking of using my fpv cam for external monitoring. I have a SN777 (KX550) Sony 1/3ccd cam with stock lens. Does anyone have an idea if it's a quite the same as 18mm on my kitlens (nex5n)?

I do like my PH av130, but the skyline is a total mess. The service also is a mess, the mails they reply on, are 2-3 weeks before sent. I am returning the skyline ones they reply to my mail. The hoverfly is allready on it's way, the results I saw are miles better than what you achieve with the...

Hello, Today I was trying to get my AV130 right. Also my (bought this week) new graupner mx20 didn't give me any telemetry info so I decided to update the electric air module (which I could not achieve for some reason). I just plugged back in the cables and powered it up. After this I powered...

I've seen far better vid's from users and especially better than the skyline's video's. Are more people out there having hoverfly and skyline?

What type of ferriet ring do I need? Is any ring ok? That prewrapped toroid looks the same as a ferried ring, is that right? Thanks for the many replies! the 1080I setting was allready enabled, but didn't help. A ferried ring or such should help me out (I hope).

Do you guys have proper image? Mine has interference bigtime and don't know why it has it. At the beginning when I was testing it was ok, but now all I see are stripes. Even when the heli is not powered on. The videoTx is powered on when I power on the camera so it's fed by the hdmi cable, the...