Search results

Just got the S1000 so our Evo must go. She's been great though, no bad habits. Motors have been balanced. Always hand launched and caught (to avoid getting dust on camera sensor). Only cosmetic bit is that 2 of the levers that hold down the arms look to be bent. One actually lays completely...

Started on the arms today. http://gimb.al/gryphon-x8-day-5/

Congrats Max! & You're very welcome @chipwich! We should have the new larger motor mounts the week of the 10th so I'm going to try to have everything ready for when they arrive!

Have been meaning to write a post on this very topic! http://gimb.al/gryphon-dynamics-new-pdb-bec-escs/

Decided to go the path of least resistance :) http://gimb.al/gryphon-x8-day-4/

Latest post: http://gimb.al/gryphon-x8-day-4/

Also, it would seem that the WKM Main Controller (MC) is supplied power from the canbus lead coming from the PMU. So if I wanted to NOT use the PMU, would I need to create a special cable that went from my 3rd party BEC (in this case Gryphon Dynamics) and then into a canbus port of the MC?

After thinking a bit more on it and finding a bit more documentation in the WKM manual, it monitors voltage - which means that it is no doubt what monitors the voltage for the WKM low voltage failsafe option (which I don't use). As far as the voltage monitoring on the iOSD, I'm assuming it gets...

Planning out the wiring for a heavy lift rig that will be using Gryphon Dynamic's BEC. Trying to decide whether or not I can get away without using the Wookong's PMU and use DJI's Canbus hub if we need extra ports. We will be using the iOSD, BT LED and possibly the 2.4 datalink at times. But...

Not using the quick disconnects. They looks sweet but would rather not go proprietary on that. Just using bullets (Castle) and standard servo type connectors.

Thanks Max! It is pretty amazing how light the parts are. No regrets so far. One interesting bit is that the motor mounts are not large enough for our U7s. GD says they'll be releasing larger motor mounts in the next week or so - which we'll be getting. If it's going to be longer than that...

I'm just getting started with a GD X8. http://gimb.al/build-log-gryphon-x8-day-1/

Arria, Your right, I have no vested interest and I normally wouldn't interject but your post raised a few red flags for me. 1. You're a new member and this is your first and only post. 2. Price is abnormally low 3. No pictures. Communities such as these look out for each other. If...

Price is very low. Be cautious.

Ended up ordering them with stock power wire length. They should arrive in about 2 weeks.

I am custom bulk ordering some Maytech 75 amp Harrier v1 ESCs with Simon K and will have 10 available that I won't need. These will have extra long 400mm power wires that you can trim to length so you don't have to solder on longer power wires to reach your distribution board. These normally...

As pictured. Has the tilt tray upgrade and upgraded Savox servos. Radians on all 3 axis. Works perfect. Was used to lift FS700 / Red cameras. A steal at $1800 shipped! Feel free to call if interested. (970) 405.5818 Cheers,

Yep, standard prop washer. The stock s800 should work. A friend of mine gave me these however. No modifications to motor bell housing.

Just using the 1 piece DJI props. See pic. Did have to drill out the center hole in the prop just a hair.

Has been sold. Thanks!