Search results

Thanks Samur. Second question......will Phobotic board calibrate if flying off a boat? Alexmos is pre calibrated and I can adjust horizon once airborne......so doesnt seem to effect it with the moving horizon on the deck of boat. Seems like I could calibrate on land....save the calibration...

Really excited to swap my Alexmos for the Phobotic on my G2 3Axis gimbal. My issues are of corrosion & salt air on the board. Sorry for the seemingly stupid question.......but.......Can I dunk this whole thing in Corrosion X before I mount? Anyone done this yet? I dunk my ESC's in Corrosion...

I run the long Aimdroix alum arms, even better are the carbon Aerial Mob arms and you can adjust arm length to suit your needs. Stock plastic arms from DJI are mediocre at best, very twisty when running bigger motors/props.

Really? Ive been running T-motor 14" Carbon's on my DJI F450 long arm custom for over a year. Flys perfect with 4014 400KV T-motors.

I saw a previous post of econfly's rig and he had 14" props on his 450 with extended arms. Pretty sure that is the max prop size with the 450 center plates but I could be wrong.

Been waiting for this technology to trickle down from the Epic's. Granted this will be an entirely different codec and sensor but nonetheless.....MUCH lighter/less expensive option for getting 4K aerial motion than lifting an Epic with an Octo. Here we go.....time for the 4K wars to start...

Which filter would that be? Thanks

I had same troubles with mine. I have my GP hero 3 running into the VTx, and noticed this only occurring when the actual GP in camera battery would get low. I have a 6s drivetrain that also powers the gopro, seems when the aircraft power supply had to try and recharge the onboard GP I would...

Lookin good kloner. Anxious to see the test flights/footage from the gimbal.

awesome! New G2 looks so good with GH3

Ill be swapping arms on a 700 sized quad, down to 650 with the new arms. Running 4114 350kv motors with 14" props. Pretty similar to econfly's rig

If I am planning on using 4114 sized motors, do I need the Large OD motor spacer since the edge of the motor will be hanging off the edge of the arm? I will not be using the coax motor mounts or the aluminum legs. Thanks.

Bummed to hear they shut you guys down Kloner. Was looking forward to seeing some of the footage from that shoot.

Hey Kloner, Is your Disco Pro arm mod package from AMP come with carbon tubes or only the mounts? Thanks.

Thinking about making some large sized Duracell battery stickers to put around my Lipos. Haha

Still for sale?

One time was with USA TSA. They heavily questioned me about the 2x Turnigy 6S 8000mah. They did not seem to care too much about the smaller ones. I told them is was for a toy RC helicopter and they let me go through. The other two times was with international security screening. They...

I recently traveled to indonesia for a shoot with an 800 sized quad fully built with gimbal & TX all in one Peli 1640 case (check in.) A big, inconspicuous black backpack (carry on) stuffed with 2x 6S 8000mah, 6x 6S 5100mah, 4x 3S 1000mah lipos and other misc. crap. So far the TSA didn't...

Compared my GP3 with my GP3+ side by side. There is no doubt a focusing issue with the 3+ (focus is set too close out of the box.) I decided to take apart the 3+ and unscrew the lens about 1mm to reset the focus for greater depth of field. Problem fixed if you are brave enough to pull apart...