Search results

  1. jinly

    First quad, first build, need help

    Your video says its private and could you attach your props to your Quadcopter and show the front and the rear? Thanks
  2. jinly

    Connecting servo wires to FC and Receiver

    On the Naza m v2 the signal wire (orange) goes on the bottom . The Ground wire (Brown ) goes on top. Some people remove the red Wire ( hot or current ) wire. I don't use the red wire if my esc's have a bec. If the esc's are OPTO then some people do connect the red wire ( i still don't use it). I...
  3. jinly

    First quad, first build, need help

    It sounds like a classic situation where either the props are turning the wrong way or the esc's are plugged into the wrong port on the FC. Make sure : 1) The Props are on the right motor ( i.e. CW on CW motors & CCW on CCW motors) 2) The ESC's are plugged into the right port on the FC (kk2...
  4. jinly

    Calibrating ESC Naza v2

    Actually it is easier and less time consuming to do all of them at once. You'll need a 4 in 1 or 6 in 1 (depending on what platform you are using) harness. You can make one or order one...
  5. jinly

    First build help F550

    You are so right....Nice Rig!,
  6. jinly

    First build help F550

    You also forget the amperage x voltage is going to produce certain wattage. Wattage is the factor that can burn out a motor. So motors do care what amperage they draw. Trying to carry a heavy 4s 8000mah Lipo is definitely going to draw more current. I think he said these motors max. Out at...
  7. jinly

    First build help F550

    Yes, but a 4s 8000 mah Lipo on 920 kV motors?...hmmm. I run 6s 10000 mah Lipo on 380kV motors on a quad copter using 15 inch props... I think either lower kV motor or a lower capacity 4s Lipo, maybe 4s 4500 mah Lipo.
  8. jinly

    First build help F550

    In the category for your battery.you scroll down the listed batteries. Choose the one you would like to try and then click the calculate button.
  9. jinly

    First build help F550

    your first kit the eCalc determines 18.2 min. of hover time on a 3S 8000 mah 35C lipo. The 4S Lipo will need a lower kV motor or a smaller capacity battery. The 2nd kit is what RTF f550 multicopters are usually sold with.
  10. jinly

    First build help F550

    I did the eCalc on your 2nd kit. with the 2112 920kV Motors and a 3S 8000mah 35C Lipo.The results indicate that max. amp draw is 11.6A. and the max. wattage would be 123W per motor (so it looks like it will be compatible with the E300 2212 and the 20A ESC) about 19 min. of Hover time What you...
  11. jinly

    First build help F550

    You may want to bump up your ESC's to 30 A. At max. burst you'll probably fry the 15A ESC. You'll need to know your AUW at final build. to determine your lipo. Try the eCalc program to get a vague idea what kind of flight time you'll get with your setup. 4S has more Voltage that will produce...
  12. jinly

    The things that they didnt tell me about Quadcopters

    Never let your batteries go down passed 80% discharge!
Top