Search results

My Turnigy Multistar ESC programming card allows me to select between LiXX and NiXX. While my Multirotor uses LiPos, I see that the low voltage cutoff setting for the ESC card can be set much lower if I select NiXX for the NiMH battery type. I am therefore tempted to select NiXX mode to take...

What are the appropriate ESC configurations to be used with the WooKong? Should brake be set to off, medium or hard?

I have noticed that the Carbon Fiber frames typically have the 3 wires between each motor and ESC run inside of each CF tube.......... BUT BRAIDED! Is there any advantage to that considering that there can be no emi/rfi inside these tubes?

FYI -

My electric RC delta wing remained stored in my garage for many years because of the difficulty of finding appropriate flying sites within our city.... so I eventually sold it and gave up RC flying until recently. Then I bought what I believe is a much more practical machine that can be more...

I have been flying for some time now with WooKong M-GPS on FW 5.20 but just now received the following item: http://www.dji.com/wkm-firmware-and-led-bluetooth-indicator/ 1) Can I safely assume this is the only hardware change to move up to FW 5.22 and beyond or do I need to upgrade any other...

Correct me if I am wrong but here is how I understand the recent addition of not one but two new NAZA controllers..... 1) The original NAZA M-GPS can be considered as V1 (version 1) which is easily firmware upgraded to full V2 functionality. 2) All V2 peripherals are completely compatible with...

Althought 5.2 fw seems to work perfectly when there is no wind or a stable breeze, my MR surges very hard in gusty winds (less than 12 mph). When testing RTH..... the MR can regain altitude multiple times and will take a very long time to come down.... then when it lands itself with my RC...

Bought the following item: http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=884&productname= But RCTimer did not indicate this was an OpenSource project item.......and apparently that seems to mean that this item only works with Arduino..... Who could have guessed? I...

For those creative minds that want to design a better MR airframe....... you might want to consider these two possibilities: http://www.freemansupply.com/ http://www.emachineshop.com/ Freeman has a complete section of working with carbon fiber composites as well as the production of custom...

This is a flight tested RTF c/w v1 NAZA with firmware upgraded to V2 functionality and comes with or without the a Futaba RC compatible FrSky 8 channel FASST s.bus receiver. Will reduce price by $50 if you don't want the receiver. Two sets of propellers are also included APC and Graupner...

Over 200 successful flights to date with no crashes. This is a fully operational - F550 with upgraded motors NTM 1100kv motors 2 sets of 9 inch props $500. Optional extras: 1) FrSky 8ch FASST c/w s.bus installed $50 or can be removed before shipment. (100% compatible with the Futaba T8FG...

Always looking for helpful feedback. This is my custom 800mm setup includes FPV, Hero GoPro3 Black at 1920x1080 60fps set to narrow FOV. It is installed on a brushless gimbal system w/o remote pitch control (hope to add that later). So far I am impressed with the jello free results even though...

I think this guy is on to something!!! https://www.youtube.com/watch?v=G1FqV36oEYE Would be nice though to get rid of the gear system and replace with one ESC to drive all motors at the same variable speed. Comments please!:apathy: Potential benefits? Inverted flight capability? Prop...

Anyone here doing professional level aerial video work and willing to share some ideas on an appropriate AV rate sheet? No others yet, to my knowledge in this area providing same services....respond here or send PM.:apathy:

After more than 60 excellent flights, my NAZA has now apparently developed a BAD attitude!!!! Symptoms: Sudden and rapid motor acceleration during flights with temporary loss of motor speed control from RC Tx. I have confirmed that the RC system is functioning 100% and that the receiver is in...

I have some wobble in my custom 800 HEX MR while in light breeze and in Attitude or GPS mode. Which way do I adjust the pitch and roll parameters under the section "advanced parameters" as shown in the image below the basic parameter section? This issue disappears when I am flying in manual...

Has anyone worked with the advanced parameters yet under the Basic and Attitude gain section of WKM Assistant 1.36? I would like to adjust these variables to get rid of some MR wobble that occurs only when there is wind (light or stronger). Basic and Attitude gain adjustments will not make any...

What is the verdict on the NAZA controller regarding long term MR airframe vibration? Does it eventually destroy the controller functionality? The reason I ask is that I have had 50 plus flights on my NAZA c/w F550 with upgraded motors and props and it is now going berzerk.... In spite of...

FYI - http://spectrum.ieee.org/robotics/robotics-hardware/insecteye-camera-offers-wideangle-vision-for-tiny-drones/?utm_source=techalert&utm_medium=email&utm_campaign=050213:shame: