Search results

  1. F

    3 white flashes : bad attitude mode ?

    Hello ! With my WKM I have a very bad phenomenon : It flies very stable. But after a while after power up the LED flashes with 3 white flashes. Taht means : bad attitude mode in the manual. Can anybody explain what that really means and what is wrong ? I cannot take off in that mode because...
  2. F

    Three whit flashes attitude status bad ?

    Hello ! Since today I have after power up tree white flashes meaning attitude status bad. I have the flashes also in manual mode. There was no crash. What does that mean ? How can I solve it. Fritz
  3. F

    How to isolate LIPOS from low temperature during flight ?

    Hello ! Has anybody a good idea how to isolate LIPOS against deep temperature ? If the LIPO cools down during flight in winter it looses capacity. I am looking for a good idea how to thermal isolate the LIPO with a non heavy insolation. Thank you for your help Fritz
  4. F

    Vibrations with 5.14 and old GPS

    Hello ! My configuration : S800 old GPS Zenmuse NEX 5n 5.14 10.000 mah LIPO My problem : Since 5.14 I can see zhat my videos are not sharp any more sometimes. The video starts sharp. Then after a while I can see that it gets unsharp for some seconds. After that it is sharp again. And so on...
  5. F

    New Zenmuse firmware and again no video command !!!!!!!!

    I cannot believe it ! The new firmware is out and again no command on the trigger for making videos. It should be absolutely no technical problem for a 3 postition swich to trigger photos or videos. Also the IR command for the Sony NEX is no secret. I need the command really very urgent ! I hope...
  6. F

    S800 Z15 and groundstation not possible ?

    Hello ! With S800 and Z15 there is no CAN Bus port free to connect the downlink hardware to the WKM. Has anybody any idea how I can connect the downlink hardware ? Fritz
  7. F

    S800 and Z15 strange behaviour in attitude mode

    Hello ! My S800 flies very well in GPS and attitude mode. It stays GPS within 1 meter and attitude within 0.5 meters. Only with full lipos........................ I fly 5S 8000mah LIPOS. As soon as the LIPOS are 60% empty ( far away from cell minimum voltage) the copter cant hold its hight...
  8. F

    S800 and LEDs under motors

    Hello ! On the S800 each motor has a LED under the arm. What do they mean ? At my S800 4 are green and two are red shining. The S800 flies very good but I am a litte nervouse about this ? Fritz
  9. F

    No automatic record of nose direction afte startup- Please help !

    Hello ! I have calibrated my compass successfully. The HEXA is flying very good. I have 5.14A firmware. GPS is ok ! But there is no automatic record of nose direction ca. 30 seconds after power up. It does not blink quickly green after 30 seconds. When I switch to corse lock there is because...
  10. F

    S800 and Z15 WKM setting parameters

    Hello ! Can anybody please tell me his settings for this configuration ? Thank you. Fritz
  11. F

    Remove black vertical strip in downlink picture of Z15 and NEX-5n

    Hello ! My Z15 works excellent. The downlink is also ok. The donlinkpicture is excactly the same as I see it on the LCD screen on the camera. The problem is, that on the rigt side of the picture there is a black vertical strip, where the camera siaplays "menu" and some other information. On...
  12. F

    Zenmuse Gimbal Z15 for Sony and no video triggering

    Hello ! The gimbal works very good. But I have a big problem : As I read in the manual there is no possibility to trigger a video. Just photos. Is it really so ? I cannot belive it. Please help. Fritz
  13. F

    Futaba T8FG channels 13 and 14 how to configer ?

    Hello ! The Transceiver TG8FG is a 14 channel transceiver. I can see the 2 channels DG1 and DG2 in the TX configuration menu and assign a switch. But i do not know how I ca output those two channels on a receiver. I have configured the 8 channel receiver to output channels 9 to 16. The channels...
  14. F

    Zenmuse Gimbal Z15 questions please help

    Hello ! After many tries with other gimbals and gimbal controllers I have ordered a Zenmuse Z15. I got it yesterday. I am hoping that if I have any problem that somebody will be able to help me to get the best results. My fist question : I have seen many very good videos. In the manual is...
  15. F

    WKM OCTOcopter Motor 3 and ESC get much hotter than the others

    Hello ! On my OCTO motor 3 and the ESC get much hotter than the others. The Octo has a diameter of 1 meter and has 5 kilos. The copter is well balanced so this is not the problem. All the motors and the ESCss are of the same kind. Can anybody help me ? Did anybody have the same effect ...
  16. F

    My new built WKM Octocopter

    Hello ! I just want to show you some pictures of my new octocopter ! I am using the newest firmware and S-Bus. Distance between motors : 1 meter ESC : Mystery Cloud 60A 6S Motor: EMP C3542 LIPO : 8000mah 5S I flies very stable and nice. No problems. Fritz
  17. F

    WKM OKTO Gimbal servo outputs ?

    Hello ! Is it right, that the T and R connectors are outputs to the gimbal servos if it is a Futaba S-Bus system ? Because normally they are inputs. Fritz
  18. F

    WKM Gimbal control with firmware 5.12a ? any experiences ?

    Hello ! I am wondering how the gimbal control is working with firmware 5.12a. I did not find any comment if it is good or bad. Nobody is talking about this. Can anybody tell me if I can use this control for a heavy HEXA for good results in video ? Fritz
  19. F

    Where to buy Z15 in europe ?

    Hello ! Can anybody tell me where I can buy the Z15 gimbal here in europe ? Fritz
  20. F

    Wookong-M Firmware v5.10

    Hello ! I just downloaded the latest assistant and the new manual. I find it very very confusing how the new features are configured. For example the new intelligent orientation control control modes 1 2 and 3. How are the configured and how do I use one of them with the same switch. I hope...
Top