Search results

@violetwolf whould an extension cable help something like this? http://www.usbfirewire.com/hdmi_mini_extension_cable.html

Thanks, like violetwolf I am just looking to get a feed back so I know what I am aimed at. The full HD would be better but too expensive for now. I'll be relying on the auto focus and tracking keep a good image. I am hoping to be able to control the shutter/start stop and zoom using a...

@violetwolf - The response to my question on vimeo about the av out was " The drone uses Lightbridge technology that has an HDMI input which works with the HDMI live output delivered by the A6300. On the Matrice 100 you need additionally the N1 video encoder. For other platforms something like...

Thanks for setting up the new thread. Good point about the wifi - I had wondered about interference. Great video above. I posted a comment asking about the video out. I actually bought an A6300 the other day. I went in to the store 100% sure I was getting a GH4 but the guy in the store...

Dito on that question.... it was going be my next question... how to get a video feed out and back to the ground. the wifi app might has some range to mess with but the lag in the image (camera to tablet/phone) is too much.

thanks I had not seen that one. Unfortunately that looks like another site confirming it has a big issue with temperature when doing video, I wonder how fast it would overheat outdoor event when the temps are 80-90+ in the summer. Seems the GH4 does not have the same issues. I guess I need...

@violetwolf, @ajgrattan ...... Anyone end up getting an A6300 and if so any feedback? I am currently debating between the GH4 and the A6300. The A6300 seems better on paper however I have been reading reviews and hearing about sensor overheat issues??? Is this an issue?

This may be the wrong thread apologies if I should post elsewhere. I am looking at cameras and debating between the GH4 and the A6300. The A7sII is out of the price range. I was dead set on a GH4 until I went into the store to get it and the guys there showed me the A6300. Seemed like a...

I have the Infinity MR. I used slightly shorter 3M screws as the original ones the MR came with that went thru with a bolt were a little too long for the mounts. I will be adding a 'safety strap' just in case they somehow came loose so the gimbal couldn't fall to the ground.

The quick release mounts arrived and I got them installed seem to work well. Hope to make a flight with them this weekend if weather permits.

@Filthy - here are screen shots of the settings. Are these what you were looking for? Only thing I chanced was to uncheck the follow yaw.

Excellent thanks, good to know. I noticed you are using a similar video camera. What are you using to get an fpv view from that camera? I have a sony cx-130 it has a mini HDMI out but I need to convert that to something I can feed into a video tx. Is there a cable you found that works well...

I ordered these to see if they would work for a quick release system. They should arrive pretty soon. If they do work I will also be adding a safety strap as a fail-safe. Also want to see if I can add a strap to lock them closed. Kinda pricey so hoping they work...

@Filthy - I'd be happy to share them. By profiles I am assuming some settings in the gimbal? Just need to clarify what you are looking for.

New guy chiming in... I got an Infinity MR at the end of December last year and am finally starting to use it. I am still debating on what camera to get. But wanted to get my initial impressions out. First off working with Jakub has been great, very responsive and helpful. The gimbal...

Well it is fixed! I swapped out the ESC and now it is flying very well. I did add some more weight as well to simulate the payload. My thinking is that either 1) There was some mismatch between the ZTW spider 40A esc and the TMotor 4014 330kv (there was some info in the ZTW instructions that...

Thanks for the relpy. I have the Naza V2 flight control mounted in the correct direction, its in the center of the frame looking down on it but mounted on top of the top plate vs in between the top and bottom plates so it is above the CG. I think that should be ok from what I have seem of...

I've been following the forum for a while now and have been flying a DJI 550 for a bit over a year. I bought a T960 about the same time and built it slowly over the last year as I didn't think it was a good idea to go straight to a 960 size. I have flown RC planes for many years so I am not...