Search results

The DJI A2 is specifically mentioned in my TC SFOC application here in Canada....... not sure if they are aware of this development in Great Britain. For reasons of public safety I just recently cancelled out on a contract to do aerial videos for a local 18 hole golf course as a result of these...

FC.... if you are trying to minimize battery weight relative to total capacity I seem to recall that the top of the line Thunder Power LiPos offer better amp output relative to total battery weight than most other brands. In the past 2 years or so I have never had any issues yet with any of my...

I am not yet familiar with throttle curve adjustment within Futaba Transmitters. But in the meantime do globally adjust the throttle curve so all three FC modes use i, e.g., exponential such that response in the middle of the throttle range is very soft or...... Do a activate a specific throttle...

I know someone has posted a solution to this common issue with respect to the DJI Flight computers but I can't seem to locate it now. I need to adjust my Cinestar 8 system so that I can transition between GPS, Attitude and Manual without the powerful vertical speed surge when I switch over to...

FWIW I am sure the S1000 is a good choice but I already purchased the Cinestar 8... which is now equipped with a DJI A2 and I am using the Futaba T8FG Super Radio system. All is well so far after approximately 16 test flights.... Most test flights are to resolve BGC control issues and I am...

We had a microwave course at University back in the 70's including lab work. Whereas spurious emissions and/or harmonics can be minimized, the regulators recognize that they cannot be entirely eliminated such that regulations stipulate a legal threshold. The best way to examine for such...

When you say it tipped over during the landing process..... are you landing level first then finding that some of the motors speed up after landing or are you saying that it is tipping immediately as it contacts the ground?

Birds are a natural risk that pilots have learned to risk manage to some extent but adding hard objects to the mix only makes it worse and more worrisome for the pilots and passengers. 90% of the fun and money to be made with MR's is probably within 150 feet of the ground so why fly higher? It...

Amazing...... where was Lady Gaga?

I now have a spare 4 port battery charger to sell. It has been used for about one year and is 100%. It has all features except for individual cell internal resistance readings.... which is the main reason I moved up to a newer dual port iCharger. I will sell this item for $65 which includes...

I have 3 spare Martinez 2 Axis Brushless Gimbal controller for sale. Each has latest firmware installed, has been tested on my Brushless Gimbal c/w PID loops tuned for GoPro camera. This makes it so much easier for those not familiar with Arduino open source systems and the related challenges to...

Very sorry to hear the bad news Rory.... hope the situation improves going forward.

I had too many issues with extending the 8 bit to allow for the 3rd, i.e., Yaw access board especially with the board layout and wiring..... made for a very messy job so I moved on to the 32bit. The 32 bit allows for the 2nd IMU which, I believe, the 8 bit does not. It also has a significant...

So strategically speaking, with respect to a golf course fairway flight from tee box to green, allow MR with 3axis BGC-camera to maintain straight forward heading, then have camera man take over yaw and pitch control once close to the green.... With now need for yaw follow mode!

Tom...Good2know... I will work on that.... Thanks4feedback.

Yes the horizon will wander from time to time as per the conditions as stated in GUI version 2.41 documentation. I believe this is a laws-of-physics boundary limitation because the IMUs do not contain magnetometer(s) as does the MR FCs for more precise horizon detection. But with the Basecam 32...

In addition to Blotto's comments, I like to configure each ESC for the Joystick throttle range by bypassing the FC and doing it thru the RC receiver. I discovered the need to do this when ground testing an MR equipped with Turnigy Plush ESCs..... the motor speed would randomly shift up and...

So is the 2nd IMU mounted above or below the Yaw motor? And is the software configured to allow the BGC to see the FC pitch and yaw outputs? Both are supposed to help with BGC precision etc. What is your camera and what BGC motors are you using?

Finally some encouraging feedback on the DJI A2..... sounds like you are confident to say the least..... no rogue waves means no missing fingers for fish food! :tennis:

From what I have read here on MRF it appears most of the issues with latest A2 firmware are related in some way to the GPS, e.g., suddenly lost or erratic GPS signals etc. With POI and many other functions including RTH depending upon GPS, loss of GPS is an issue. Also the GPS/digital compass...