Recent content by Treg

If you go to 4s I would use 9x4.7 CF then it should run cooler, what ever you use you want it to hover at 45-55%

I would recommend using 4s and getting that hover throttle down to 50% where it belongs.

Can't you hold the motor with one hand and turn the prop with the other?

I put the 8" Graupners on and the altitude is stable looks like I just had to much prop. Hovers in manual at about 50%. Thanks for the input Kloner

I have a set of 8" Graupner I will try them this afternoon and report back, thanks Kloner.

around 1/4 throttle

It holds good in manual and has much more power.

Hi Lauren this is the latest one, it flies great just has this up and down pulsing. The AUW is 1300 g.

I am using a 4s 3000mah 880 kv Storm motors and 9x4.7 cf props, what is AUW? I also have 3 other MR a HEX,Y6 and X8 and they all fly perfect, this one flies good it is just when I want to hover for a few min. it climbs and descends back and forth at about 15-20 foot pattern.

I am having a little problem with one of my NAZA Lites on a Quad, it is not holding its altitude in any mode, it will climb and the drop then climb and drop, other than that it is very stable, any help would be great. Gains do not seem to affect this problem.

Thats what I wanted to hear, Thanks

Is it necessary to throttle calibrate these ESCs? If so is it done in the normal way?

I am getting 10 min with gimbal, Gopro, heavy lift conversion with a 4s 8000 mah battery, more than enough time for any video.

I agree about the wire length, it should be added to the motors not the ESC.

Thanks they must be the new 1.5 version