Recent content by RobBurn

Did you post "how to"? Id like to check this out.

I agree with you on the isues people have with naza. Now if it does happen to me and trust me i think about it before i fly ill be the first on here to say dam there is an issue. I have a preflight checklist and really watch the naza start up leds and need minimum 6 sats before i go. I do alot...

Look at my sig. 4s 5000. I get 10 minutes of easy flying and hovering. Id also recommend a 3d gimbal.

rock solid. Thats a good place to be. Id stick with it. Go fly and enjoy it.

Futaba 14SG. Alot of money invested, i believe the radio justifies the price

Order of some checks First check gopro and make sure wireless is OFF. if off then leave gopro off and fly it. Unpower the gimbal, fly it, does it still rotate clockwise? If it does not something is interfering with naza or compass Check the gps puck as is may not be aligned correctly based...

Return it. Also you should not have a charged lipo more than a day. The real key is to the temp , if your in hot climate like over 80 I'd do a storage charge the same day. You can do as you wish but it's all risk related.

Will have to see what it's made of... I would think its the guts of the latest p2 with a updated vision + camera? It's brillant in that they can break away from gopro and at the same time make bank on the camera like gopro does on theirs. i tell you they better get the customer service...

Thinking more about this I think dji hd-3d gimbals life is over as the hero3+ blacks life is over. It's still for sale but it's discontinued from gopro so when the quantities dry up it's adios. How can they sell a gimbal for hero 3? Well the hero3 silver and basic will still work but it's not...

Yes i'm thinking like you. I'm assuming that the hero4 black has better sensors and for what i do the 1080P/60 or down to 30 was fine for my purpose so i'd run the hero4 at the same settings to get a better video, if the sensor / other items such as focus is better I like that and it would be...

So when it's setting at idle you do not notice the gimbal motor's making any noise? where you using a hero3 before and had the horizontal tilt? or was it ok and you got this tilt with the hero4? thanks for your feedback.

I posted this in general questions and since it's DJI equipment i'll post it up here. I've read and watched some video and see the hero4 fits and works with hd-3d using the usb connector. Okay I also read it's about 14 grams heavier. I've not read anything about how it really works with the...

I've read and watched some video and see the hero4 fits and works with hd-3d using the usb connector. Okay I also read it's about 14 grams heavier. I've not read anything about how it really works with the gimbal as far as balance, am I to assume the weight gain from the 3+ to 4 is...

Look at the manual. The mark2 (page 6) av1/av2 puts out - 3S batt Input volt equals output to camera. 4S-6S puts the output equal to 11.2V... Would be ok

So was this the first time you flew this hex? A lot of information missing... Like was this the first flight for this lipo? What was the cut off voltage setting? I don't know if you have experience with lipos? I ask these questions because if you were unfamiliar with the lipo and is it...