Naza + Opto 30A ESC + other motor = flip?

[sgquad]

Hi guys

I was refering to the spreadsheet. Noticed that all those using Opto 30A ESC were running the stock motor. Anyone using the ESC with other motor? I have the sunnysky 980 motor with 10" prop. Quad just flip on throttle. Any ideas?

All props,connection and setting were triple checked. Should I just get those stock motor?

 

[kloner]

you have to make sure the motors are spinning the right way and that the esc motor wires come out of naza at the front. I've run suppo 2217 no problem

 

[sgquad]

Yeah I was going thru the manual again. Then I spotted the FRONT orientation of the MC. Took out top plate and reorientated the MC so that the ESC wires like kloner said is pointing towards M1 ans M2. And it fly like a charm!

 

[mailman35]

for that sunny sky are you running it on 3s or 4s?

 

[sgquad]

3S 2200mAh

 

[mailman35]

ahh im looking for a replacement for the stock dji. i came across the sunny skys, but from what i can tell most of them are 3s only, and i was 3-4s :O

 

[kloner]

if you can keep it under the rated watts, your fine no matter the voltage in most cases