Cherry Yang
Member
ZERO UAV - 3-Axis Brushless Gimbal [Owners Thread]
Hello guys,
Here are profiles of two kinds of 3-axis brushless gimbal developed by Zero UAV: Z2000 gimbal for camera 5D markII/III, Z1400 gimbal for camera GH3. Welcome to contact with us for more details or on any questions:
Sales: distributor@zerouav.com
Technical Support: support@zerouav.com
Website: www.zerouav.com
The Z2000 is a professional grade 3-axis stabilized gimbal built specifically for the Canon 5D series of cameras (EOS 5D II&III) for aerial photography and videography use. The system runs on d.c. brushless motors driven by a high-speed driver module in each axis. Combined with Zero UAV's Z-Attitude Sensor and Z-Controller, the Z2000 is a leap forward in autonomous 3-Axis DSLR camera stabilization.
Features
3-axis stabilization
Shutter control
Record control
Controlled Angle Accuracy: ±0.044°
Pan axis control: ±360° continuous rotation
Tilt axis control: ±360° continuous rotation
Roll axis control: ±40°
Supported camera:
Canon 5D MARKII; Canon 5D MARKIII (coming with free accessory for MarkIII)
Multiple lens Supported:
Canon EF17-40MM f/4L usm, 24mm/35mm, 35mm<zoom<98mm, Canon L series lens, Sigma 12-24mm 1:4.5-5.6 etc.
Featured function:
1 Higher payload capibility with large motor and driver
2 CF card can be directly inserted and extracted without dismantling gimbal
3 Extra-large space is reserved to extend wireless remote follow-focus module
4 Combined with optional Z-Attitude unit, it can be independently mounted on the car, boat, helicopter or applied to shooting from the ground with handheld hardware to meet different shooting requirments.
The Z1400 Gimbal is a professional 3-axis brushless motor gimbal of Panasonic GH3 cameras for AVP application. DC brushless motors & high-speed driver modules are used to stabilize 3 axis. The Z1400 Gimbal can be combined with the YS-X4-P and Gemini muti-rotor Autopilot to offer great stability, high accuracy and good sensitivity.
Features
3-axis stabilization
Record control
Controlled Angle Accuracy: ±0.044°
Pan axis control: ±360° continuous rotation
Tilt axis control: ±360° continuous rotation
Roll axis control: ±40°
Supported camera: Panasonic GH3
Supported lens:
Lumix G 14mm f/2.5 , Lumix G 20mm/F1.7, Panasonic LEICA 25/1.4, OLYMPUS M.ZUIKO DIGITAL ED12mm f/2.0 etc.
Featured function:
1 SD card can be directly inserted and extracted without dismantling gimbal
2 Combined with optional Z-Attitude unit, it can be independently mounted on the car, boat, helicopter or applied to shooting from the ground with handheld hardware to meet different shooting requirments.
Hello guys,
Here are profiles of two kinds of 3-axis brushless gimbal developed by Zero UAV: Z2000 gimbal for camera 5D markII/III, Z1400 gimbal for camera GH3. Welcome to contact with us for more details or on any questions:
Sales: distributor@zerouav.com
Technical Support: support@zerouav.com
Website: www.zerouav.com
The Z2000 is a professional grade 3-axis stabilized gimbal built specifically for the Canon 5D series of cameras (EOS 5D II&III) for aerial photography and videography use. The system runs on d.c. brushless motors driven by a high-speed driver module in each axis. Combined with Zero UAV's Z-Attitude Sensor and Z-Controller, the Z2000 is a leap forward in autonomous 3-Axis DSLR camera stabilization.
Features
3-axis stabilization
Shutter control
Record control
Controlled Angle Accuracy: ±0.044°
Pan axis control: ±360° continuous rotation
Tilt axis control: ±360° continuous rotation
Roll axis control: ±40°
Supported camera:
Canon 5D MARKII; Canon 5D MARKIII (coming with free accessory for MarkIII)
Multiple lens Supported:
Canon EF17-40MM f/4L usm, 24mm/35mm, 35mm<zoom<98mm, Canon L series lens, Sigma 12-24mm 1:4.5-5.6 etc.
Featured function:
1 Higher payload capibility with large motor and driver
2 CF card can be directly inserted and extracted without dismantling gimbal
3 Extra-large space is reserved to extend wireless remote follow-focus module
4 Combined with optional Z-Attitude unit, it can be independently mounted on the car, boat, helicopter or applied to shooting from the ground with handheld hardware to meet different shooting requirments.
The Z1400 Gimbal is a professional 3-axis brushless motor gimbal of Panasonic GH3 cameras for AVP application. DC brushless motors & high-speed driver modules are used to stabilize 3 axis. The Z1400 Gimbal can be combined with the YS-X4-P and Gemini muti-rotor Autopilot to offer great stability, high accuracy and good sensitivity.
Features
3-axis stabilization
Record control
Controlled Angle Accuracy: ±0.044°
Pan axis control: ±360° continuous rotation
Tilt axis control: ±360° continuous rotation
Roll axis control: ±40°
Supported camera: Panasonic GH3
Supported lens:
Lumix G 14mm f/2.5 , Lumix G 20mm/F1.7, Panasonic LEICA 25/1.4, OLYMPUS M.ZUIKO DIGITAL ED12mm f/2.0 etc.
Featured function:
1 SD card can be directly inserted and extracted without dismantling gimbal
2 Combined with optional Z-Attitude unit, it can be independently mounted on the car, boat, helicopter or applied to shooting from the ground with handheld hardware to meet different shooting requirments.
Attachments
Last edited by a moderator:
