Not a bad one it happen about 8 feet from the ground but it was kinda weird so I have some questions. The first one has to do with battery voltage and when on a 11.1v what would be a good voltage to land the system. I ask this mainly because of the way the crash happened, it seemed that the system slowly lost power then fell out of the sky, like it could not keep up with what it needed to stay afloat. When measured the battery's voltage it was at a 10.6v, I looked a another battery that I had used just before and that was at 10.2 I had not problems, now I am trying to figure it out.
So is there a danger zone, in theses ranges, Other then the obvious of properly setting the voltage meter in the firmware. I looking for a general guide line. Also is this something a 14.7V would more over come
My set up is an Xaircraft x650 with Xaircraft motors, and dji 12A ESC's
Thanks
So is there a danger zone, in theses ranges, Other then the obvious of properly setting the voltage meter in the firmware. I looking for a general guide line. Also is this something a 14.7V would more over come
My set up is an Xaircraft x650 with Xaircraft motors, and dji 12A ESC's
Thanks