Using TILT on AUX3 Spektrum DX8

[NotSoNoob]

Ok guys this is a brain buster, for me anyway.
I'm hoping someone can figure this out.

I have ;

DJI 550 HEX with a DX8 tx

Naza GPS

OrangeRx R910 9 ch rx

The naza uses 6 channels, I have channels 7 8 9 left

I would like to connect my Predator v2 CAMERA with aTilt control using the AUX 3 knob on my DX8.

I already have the camera on a pan/tilt mount but would only want to use TILT.

I would stick it on channel 7 of the rx.

Can anyone please help me figure this out?

Thank you for reading...

 

[tstrike]

Try holding your scroll wheel down while you power up the tx, then scroll down to switch select and assign the knob to the channel of your choice.

 

[PeteDee]

Are you really going to adjust your tilt in flight, tilt is generally sideways or roll movement, most gimbals that are called pan/tilt don't pan they pitch/roll and it is the pitch that most flyers want to adjust in flight.

I have several set up using the rear slider but you can use a three position switch quite effectively.

Pete

 

[Benjamin Kenobi]

Try holding your scroll wheel down while you power up the tx, then scroll down to switch select and assign the knob to the channel of your choice.

+1.

 

[tiggybengal]

did you find out how to do it?

i want to setup my alexmos board to be connected to my receiver to control the tilt so i can make the camera look down as i please

 

[tiggybengal]

are you serious answering this like you did it was most unhelpful the bloke wants to make the camera look down as he wants nothing to do with roll and tilt adjustment