donandtheresa
Member
I decided its time to thin my family down, I have 2 Thunder Tiger Mini Titans for sale. I am selling them as individual helicopters. The both fly well, one is bound with a spektrum receiver and the other with a futaba receiver. The purple/yelllow canopy has Hitec HS-65MG cyclic servos, a Futaba GY401 gyro with a Futaba S9650 tail servo, Ripper OBL 29/37-10H Outrunner Brushless Motor and BLC-40A Brushless ESC, metal head and metal tail grips, SAB 325 main blades, and carbon fiber tail blades, now what issues it had is a tab for the landing gear off the main frame is missing but has not affected flight and I no longer have the vertical tail fin. The red/white canopy has a Futaba GY240 gyro with a Hitec HSG-5084MG tail servo, Hitec HS-65MG cyclic servos, Ripper OBL 29/36-10 H Outrunner Brushless Motor and BLC-40A Brushless ESC, Plastic head and plastic tail. Align night blades that have not worked since I bought them but I do have the charger for them. The blades work with an external 1s lipo hooked to them. From what I understand the batteries that are inside the blades have always had issues straight for the factory. I assume this is why align no longer sells them. I do have an extra set of align night blades and 1 set of the original stock wood blades. I would like to see $200 apiece for them with receivers, or $180 apiece without receivers shipping included in the ConUS. I would be willing to sell them as a pair for $350 with receiver or $300 without receivers shipping included to the ConUS.
Upon shipping I will be removing the mainshaft/head assy and the tail assy to make it safer to package. You will need to recheck the tracking and locktite bolts once you reassemble it, as you should always do after reassembly anyways. Thank you for looking. Any question please feel free to ask. Hope you all have a Happy Thanksgiving.
Upon shipping I will be removing the mainshaft/head assy and the tail assy to make it safer to package. You will need to recheck the tracking and locktite bolts once you reassemble it, as you should always do after reassembly anyways. Thank you for looking. Any question please feel free to ask. Hope you all have a Happy Thanksgiving.
