TBS Discovery Quadcopter RTF (Ready to Fly).

lag1791

Member
TBS Discovery Quadcopter RTF (Ready to Fly).
Currently building this copter! All parts are brand new except for the frame and motor/ ESCs have been used about five times (no crashes). Note, this motor prop setup is designed for 4s voltage.

Parts: Quadcopter
TBS Disco Frame
TBS 900kv motors & esc’s
Upgraded left hand threaded motor shaft/nut for two motors (so nut will not loosen up) will also include the 2 standard ones as spares
Naza Lt FC w/GPS
Red DJI Arms x4
9x5 APC MR props
Battery Straps
XT60 Connector for battery hookup (other styles available upon request)

Frysky DJT 2.4ghz combo, includes Frysky DJT JR module w/telemetry and a V8FR-II Rx. I will do a custom antenna shrink wrap with a V at top.
All paired and mounted to a Turnigy 9XR.
Radio Turnigy 9XR – Brand new, will include small 1600mha 3s Lipo for power. The radio is fully programmed to use all Naza modes including failsafe. I will include documentation to provide you information for what each switch does. This quad is also fine-tuned by me and will be locked in, perfectly stable in all modes and will fly stable and smooth. All you need to do is put in a charged battery (3300-4500mah 4s) and fly. I usually get 10min out of my RMRC 3300 4s and 12-13min with my nanotech 4000mah 4s.

I am asking $920.00 for all plus shipping

Add on.
If you want to add FPV to this I have RMRC 700 camera (used discounted 50%) and an ImmersionRC 600ma VTx (brand new) 5.8ghz video band. I will solder, install and test. All you will need is an uno or duo receiver and a LCD or goggles.
Additional $140.00

So Total $1060.00 usd paypal. Plus shipping.
Please feel free to PM me to discuss any questions you might have. Pics to come soon.
 

lag1791

Member
ahubyzaq.jpg
7a6aru5u.jpg
jy4u2yze.jpg
 

Top