DucktileMedia
Drone Enthusiast
I have 2 tried and true heli's that are RTF. I'm not parting anything out! You could save yourself a HUGE amount of time and money by buying my setup instead of getting all those miscellaneous pieces that take a lot of time to figure out. These rigs have been flown under pressure without 1 single flaw. The components have been assembled by an experienced builder. You wont find any shabby soldering joints or non-heat shrunk connections. Everything is as solid as can possibly be.
(2) Sky Chargers B6AC
(6) 4000mah 4s 25c GensAce lipos
JR 9503 setup for both helis as pilot radio.
Spektrum DX6i for cam operator with 7" monitor, immersion 5.8 uno vrx and 5.8Ghz 600mw vtx.
XY8:
av200/360 for dual operator
Hoverfly Pro tuned and RTF
Hover GPS board (not attached)
Hover Gimbal tuned and RTF
Tiger 2814's.
Turnigy Plush 40 amp ESC.
APC 12" & 14" SF props plus APC thins
JR 921X RX
Y6:
Tiger 2814's
APC 11" Slow Fly props.
JR 921x rx
Turnigy Plush 40 amp ESC
Av130
You will only need to add a camera and some creativity.
I would take $6,000 for the lot. You wont beat that!
Here's some video shot with these 2 helis. https://vimeo.com/56573763
View attachment 16257View attachment 16259View attachment 16258View attachment 16260View attachment 16261
(2) Sky Chargers B6AC
(6) 4000mah 4s 25c GensAce lipos
JR 9503 setup for both helis as pilot radio.
Spektrum DX6i for cam operator with 7" monitor, immersion 5.8 uno vrx and 5.8Ghz 600mw vtx.
XY8:
av200/360 for dual operator
Hoverfly Pro tuned and RTF
Hover GPS board (not attached)
Hover Gimbal tuned and RTF
Tiger 2814's.
Turnigy Plush 40 amp ESC.
APC 12" & 14" SF props plus APC thins
JR 921X RX
Y6:
Tiger 2814's
APC 11" Slow Fly props.
JR 921x rx
Turnigy Plush 40 amp ESC
Av130
You will only need to add a camera and some creativity.
I would take $6,000 for the lot. You wont beat that!
Here's some video shot with these 2 helis. https://vimeo.com/56573763
Attachments
Last edited by a moderator: