setup questions

[jinhakim]

hi i recently crashed my rotor and the frame got irreversibly damaged
the parts that survived the crash are

8 * 30A hobbywing esc
8 * t-motor 2216 kv900
2 * 4s 6000mah
naza v2

so i'm planning to get a new frame and my choices are
1. tarot FY680
2. tarot 680PRO

i wanted to get the new tarot 650 sport but my motor size is too small

which one do you guys recommend?,
and what size prop? carbon fiber 1038 or 1047

thanks for all your help!

 

[haha49]

The bigger the prop the more lift and flight time you get. I went with a 650 kv motor and a 12 inch prop. Some people do a 13 or 14 inch for the tarot unless you need the lift 12 seems to work just fine.

When you run the wires ect make sure it's all covered up as carbon fiber conducts electricity and can cause problems (so if 1 arm dips randomly land and check it) You lose controll and they can take off fast. So make sure everything electrical is covered up so it can't short out and watch out for the screws they can wear wires down as well.