Mauronic
Member
[I am not active on this site but feel free to check out my RCG and Ebay profiles to buy with confidence. I can provide references as well]
I am selling some of my smaller aircraft to fund a heavy lift rig. Serious inquiries only, post questions in this thread please.
MWC Vampire 700mm Carbon Hexi AP Rig with 2-axis Alexmos Gimbal
Product Page
- Paris V4r6 Multiwill Aerial Photography Flight Controller - Tuned for AP
- Handles like a Quad - fast and manoeuvrable yet smooth in roll - lifting power of a Hex
- Optimised for the PARIS Sirius™ brushless gimbal - flat low profile design - the camera is counterbalanced by the 4S4200 LiPo in the rear tail
- SCARAB Vampire 175mm carbon core (This core has never been fractured in any crash recorded - never)
- can be reconfigured to Quad ; Octa X ; Octa
- Airframe 695 grams - excluding engines/electronics/LiPo cell
- FPV Tray with camera, 5.8GHz 600mW Immersion RC VTx
- Payload - 850grams including LiPo
- 4 x carbon Landing Gear 120mm clearnace to lower frame
- Pro Video Props: 1060 triples - balanced
Extras
- 4 Carbonbird 4S4200 4S batteries -- perfectly maintained and stored
- USB Cable
- Spare engine parts (extra shafts, c-clips, etc)
Pictured but not included
- GoPro, X8R taranis receiver, taranis voltage sensor
Need something else? Just ask. I have:
- Additional props, spare parts, receivers, etc
5 months old, flown under 10 hours
Purchase Price: $1,360
Selling Price: $1,090 RTF for Pickup in Pasadena, CA or $1,090 + S&H partially disassembled ARF
Questions? Post in this thread below.
I am selling some of my smaller aircraft to fund a heavy lift rig. Serious inquiries only, post questions in this thread please.
MWC Vampire 700mm Carbon Hexi AP Rig with 2-axis Alexmos Gimbal
Product Page
- Paris V4r6 Multiwill Aerial Photography Flight Controller - Tuned for AP
- Handles like a Quad - fast and manoeuvrable yet smooth in roll - lifting power of a Hex
- Optimised for the PARIS Sirius™ brushless gimbal - flat low profile design - the camera is counterbalanced by the 4S4200 LiPo in the rear tail
- SCARAB Vampire 175mm carbon core (This core has never been fractured in any crash recorded - never)
- can be reconfigured to Quad ; Octa X ; Octa
- Airframe 695 grams - excluding engines/electronics/LiPo cell
- FPV Tray with camera, 5.8GHz 600mW Immersion RC VTx
- Payload - 850grams including LiPo
- 4 x carbon Landing Gear 120mm clearnace to lower frame
- Pro Video Props: 1060 triples - balanced
Extras
- 4 Carbonbird 4S4200 4S batteries -- perfectly maintained and stored
- USB Cable
- Spare engine parts (extra shafts, c-clips, etc)
Pictured but not included
- GoPro, X8R taranis receiver, taranis voltage sensor
Need something else? Just ask. I have:
- Additional props, spare parts, receivers, etc
5 months old, flown under 10 hours
Purchase Price: $1,360
Selling Price: $1,090 RTF for Pickup in Pasadena, CA or $1,090 + S&H partially disassembled ARF
Questions? Post in this thread below.
Attachments
-
WP_20140130_10_15_10_Pro_last.jpg146.1 KB · Views: 294
-
WP_20140130_12_00_12_Pro.jpg148.4 KB · Views: 280
-
WP_20140130_12_00_46_Pro.jpg146.6 KB · Views: 320
-
WP_20140130_12_02_17_Pro_first.jpg149.2 KB · Views: 262
-
WP_20140130_12_03_12_Pro.jpg150.6 KB · Views: 229
-
WP_20140130_12_03_42_Pro.jpg150.2 KB · Views: 251