Droider
Drone Enthusiast
Aye up.
Here is my quick video to show how easy it is to change a single axis Radian in to a fully tuneable 3 axis gimbal controller. No smoke and mirrors just a firmware upgrade developed by Carvec RC systems. What makes me really buzz about this is its British. John Cunningham, the originator of the Carvec autonomous flight system for SR helies over a decade ago and the master code writer behind the Radian has released this firmware upgrade. He has been beavering away while your Skyline, Piclocks, Alexmoss, DJI etc etc developers have been rushing to market releasing and licensing product that really have never cut it. Now the G-LOCK system will control your standard servo driven systems or brushless direct and indirect drives to a whole new level. Really well though out interfaces makes it easy even for a Windoz ludite like me. Not only does the G-Lock control brushless drivers but will interlink with a amazing new product called the signal master. More on that in another post but basically you can hand over your machine to another pilot, and another and another and so much more. Bloody Brits eh! from helicopters to hovercraft, Yorkshire puds to Yorkshire flight controllers.. I am really made up to be able to work with a true ground breaker. anyhow the story will continue as I learn and pass on my experiences with Carvec.
Here is my attempt to introduce you to where we all need to start, the conversion of a Radian single axis gimbal controller to a Carvec G-LOCK three axis Gimbal controller
Dave
Here is my quick video to show how easy it is to change a single axis Radian in to a fully tuneable 3 axis gimbal controller. No smoke and mirrors just a firmware upgrade developed by Carvec RC systems. What makes me really buzz about this is its British. John Cunningham, the originator of the Carvec autonomous flight system for SR helies over a decade ago and the master code writer behind the Radian has released this firmware upgrade. He has been beavering away while your Skyline, Piclocks, Alexmoss, DJI etc etc developers have been rushing to market releasing and licensing product that really have never cut it. Now the G-LOCK system will control your standard servo driven systems or brushless direct and indirect drives to a whole new level. Really well though out interfaces makes it easy even for a Windoz ludite like me. Not only does the G-Lock control brushless drivers but will interlink with a amazing new product called the signal master. More on that in another post but basically you can hand over your machine to another pilot, and another and another and so much more. Bloody Brits eh! from helicopters to hovercraft, Yorkshire puds to Yorkshire flight controllers.. I am really made up to be able to work with a true ground breaker. anyhow the story will continue as I learn and pass on my experiences with Carvec.
Here is my attempt to introduce you to where we all need to start, the conversion of a Radian single axis gimbal controller to a Carvec G-LOCK three axis Gimbal controller
Dave
Last edited by a moderator:
