Mikrokopter Carbon Octocopter with Graupner MX20 / Cinestar 2-axis / iPhone telemetry

S

Sid3ways

Member
I have an Octo that hasn't been fully setup and I won't have time to get around to it. It was previously setup for a customer that we have exchanged. This unit is all wired up and ready to go, just needs final MK setup so if you are familiar with MK this should be a no-brainer for you.


-Onyxstar Octo Frame (new) 1000mm
-MK 2.1ME (new)
-MK 8x BL2.1 ESCs in distro board (new)
-MK Navi 2.0 (new)
-MK GPS 2.1 (new)
-AVRoto 2814-11 (new)
-Graupner MX-20 with Graupner 6000mah upgrade lipo
-iPhone telemetry modules for Navi & iPhone
-Cinestar 2-Axis camera mount
-Photohigher Skyline RSGS camera stabilizer
-4x 4S 5000 30C Turnigy Lipos




Price: I'd like to get 5,800 OBO for this or will trade for other copter setups, please let me know what you have to offer.


Picture shows how it was initially setup but it has now been reconfigured as the parts list above.


I won't part the copter itself out but have different camera mounts I can sell with it as I have a few here. Z15 Zenmuse, or AV200. :popcorn:
 

Attachments

  • 532132_258890464211189_239825921_n.jpg
    532132_258890464211189_239825921_n.jpg
    106.1 KB · Views: 676


S

Sid3ways

Member
New Pricing!
Price
$3200 for the Octo, Lipos, & telemetry
+$800 for Cinestar or AV200 (only selling with the copter first, don't ask to part this out)
+$500 for Graupner MX20
 

S

Sid3ways

Member
Price
$3000 for the Octo, Lipos, & telemetry
+$800 for Cinestar or AV200 (only selling with the copter first, don't ask to part this out)
+$500 for Graupner MX20
 



jfro

jfro

Aerial Fun
Do you have a picture of the current config?
With the Cinestar 2 axis, what is the safe limit on how much camera & lens can weigh assuming running with 2 lipos?
 
Last edited by a moderator:

S

Sid3ways

Member
Not sure how I missed this. I will try to get a picture of the current setup here for you to see. For anyone wondering, you could easily lift a 5D with this copter.

Price Drop
$2850 for the Octo, Lipos, & telemetry
+$800 for Cinestar or AV200 (only selling with the copter first, don't ask to part this out)
+$500 for Graupner MX20
 

S

Sid3ways

Member
Price
$2700 for the Octo, Lipos, & telemetry
+$800 for Cinestar or AV200 (only selling with the copter first, don't ask to part this out)
+$480 for Graupner MX20
 






L

lbelland

Member
Do you have a photo of the configuration you're selling? What condition is the Z15 in? How many of these have you built? Do you have any references?
 




You must log in or register to reply here.
Top