onthebrinc
Member
Quad= Quanum Venture
Tx: Spectrum dx6i, Rx: spectrum ar6210, Naza Mlite flight controller
Motors= multistar mt2213 935 kv
ESC= afro esc 20amp x 4
8''x4.5
Current batt= 2200 mah 3s
I have about 25 minutes of fliht after going through all the setup. It was a bit of a learning curve to setup the dx6i with the naza because it only has 2 position switches but i was able to get the gps middle failsafe and the atti working on my u channel. Flight is great its super stable full control but now i want to do more with the naza.
I have the manual but am having trouble understanding how to make the gps work.
Channel u has the 5 modes in this order
gps failsafe atti failsafe manual
My questions
1. So if the unit is equiped with a gps than atti modes is always gps?
2. How do you change between atti and gps atti when there is no option on the u channel?
3. Why is there 2 failsafe spots on the u channel.
If i want to fly in gps what exactly do i do when starting. I have the light (led) desription literature however it decodes the lights but does not explain how to get going.
With my tx i setup to have gps failsafe and atti modes available. I cant get any difference between gps and atti mode when flying they both seem to do the same through.
Any explanation of the naza flight modes would be great. Like i said i understand how to set it control the u channel i just need some guidance on how to use it.
Thanks
Tx: Spectrum dx6i, Rx: spectrum ar6210, Naza Mlite flight controller
Motors= multistar mt2213 935 kv
ESC= afro esc 20amp x 4
8''x4.5
Current batt= 2200 mah 3s
I have about 25 minutes of fliht after going through all the setup. It was a bit of a learning curve to setup the dx6i with the naza because it only has 2 position switches but i was able to get the gps middle failsafe and the atti working on my u channel. Flight is great its super stable full control but now i want to do more with the naza.
I have the manual but am having trouble understanding how to make the gps work.
Channel u has the 5 modes in this order
gps failsafe atti failsafe manual
My questions
1. So if the unit is equiped with a gps than atti modes is always gps?
2. How do you change between atti and gps atti when there is no option on the u channel?
3. Why is there 2 failsafe spots on the u channel.
If i want to fly in gps what exactly do i do when starting. I have the light (led) desription literature however it decodes the lights but does not explain how to get going.
With my tx i setup to have gps failsafe and atti modes available. I cant get any difference between gps and atti mode when flying they both seem to do the same through.
Any explanation of the naza flight modes would be great. Like i said i understand how to set it control the u channel i just need some guidance on how to use it.
Thanks