Hi Guys,
I upgraded my CS8 to use larger motors because of the need to lift heavier payloads but if you're in the market to fly DSLR's like Canon MKIII or GH3, this is the best set of motors/ESC's on the market. I probably should just buy another cinestar frame, slap this on and make it RTF but don't have the time. These motors/esc's only have about 10 flights max and its sad to have to sell them but don't need them anymore. The motors and ESC's come with Andersen Power Pole high dent connectors. The most reliable connectors available.
10 x KW8 Motors cost me = $1200
9 x Castle Phoenix ICE Lite 75amp Esc's cost = $1000 (one of which is new and not pictured below. It was my backup ESC.)
Misc Parts/connectors = $200
Labor = 2 days
Total Paid = $2400
I'm only asking $1400 OBO (ouch :black_eyed:, that hurts)
I'd prefer to sell it as a complete set but depending on the offer, I may consider separating...
Note that one of the KW8's shipped from Kopterworx unbalanced. Its in one of the black boxes in the photo below. All you'll need is a set of new bearings and it'll be good as new!. The rest are in perfect working order.
We used these motors in this video but I do not recommend using KW8's for lifting payloads larger than a Canon MKIII. Like I said, this motor/ESC/Harness set is PERFECT for high end DSLR's like MKIII, GH3. With 13" props, you can't ask for smoother footage...
Note, I also have 10 x Turnigy 5S-8000mAh lipos with XT-90 connectors. They're perfect for these motors. PM me if you're interested.
View attachment 12218View attachment 12219View attachment 12220View attachment 12221View attachment 12222View attachment 12223View attachment 12224View attachment 12225View attachment 12226View attachment 12227View attachment 12228View attachment 12229View attachment 12230View attachment 12231View attachment 12232View attachment 12233View attachment 12234
I upgraded my CS8 to use larger motors because of the need to lift heavier payloads but if you're in the market to fly DSLR's like Canon MKIII or GH3, this is the best set of motors/ESC's on the market. I probably should just buy another cinestar frame, slap this on and make it RTF but don't have the time. These motors/esc's only have about 10 flights max and its sad to have to sell them but don't need them anymore. The motors and ESC's come with Andersen Power Pole high dent connectors. The most reliable connectors available.
10 x KW8 Motors cost me = $1200
9 x Castle Phoenix ICE Lite 75amp Esc's cost = $1000 (one of which is new and not pictured below. It was my backup ESC.)
Misc Parts/connectors = $200
Labor = 2 days
Total Paid = $2400
I'm only asking $1400 OBO (ouch :black_eyed:, that hurts)
I'd prefer to sell it as a complete set but depending on the offer, I may consider separating...
Note that one of the KW8's shipped from Kopterworx unbalanced. Its in one of the black boxes in the photo below. All you'll need is a set of new bearings and it'll be good as new!. The rest are in perfect working order.
We used these motors in this video but I do not recommend using KW8's for lifting payloads larger than a Canon MKIII. Like I said, this motor/ESC/Harness set is PERFECT for high end DSLR's like MKIII, GH3. With 13" props, you can't ask for smoother footage...
Note, I also have 10 x Turnigy 5S-8000mAh lipos with XT-90 connectors. They're perfect for these motors. PM me if you're interested.
View attachment 12218View attachment 12219View attachment 12220View attachment 12221View attachment 12222View attachment 12223View attachment 12224View attachment 12225View attachment 12226View attachment 12227View attachment 12228View attachment 12229View attachment 12230View attachment 12231View attachment 12232View attachment 12233View attachment 12234
Attachments
Last edited by a moderator: