First build, what do you guys think?

[sparky2697]

Quadcoper Beta 4.0
Alright, fourth times the charm. Do you guys think this would fly/work?
Any compatibility issues?

Frame:
Makerfire H250 All Carbon Fiber Quadcopter Frame
http://amzn.com/B00PH4659O

Power Distribution Board:
ARRIS® CC3D Naze32 Flight Controller Mini Power Distribution Board w/LED (Comes with BEC 5V-12V output) for 250 Multicopter
http://amzn.com/B00UFK8VJ2

Flight Controller:
EMAX Skyline32 Flight Controller (Advanced V1.1)
http://www.emaxmodel.com/emax-skyli...ced-1719.html#product_tabs_description_tabbed

ESC:
Emax SimonK 12A Brushless ESC Speed Controller For FPV QAV250
http://amzn.com/B00X7LLAT4

Motors:
EMAX MT1806 KV2280 Brushless Motor for QAV 250
http://amzn.com/B00XY6SX38

Props:
5x3 Carbon Fiber Propellers 5030 2 pairs (I’m going to buy 2 sets of these)
http://amzn.com/B00UTGAPYG

Batteries:
2 Packs Floureon 3S 25C 11.1V 2200mAh Li-Polymer Lipo RC Battery Pack with XT60 Plug Connector for RC Helicopter RC Airplane RC Hobby
http://amzn.com/B00LZKHNG8

FPV Headset:
Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor
http://www.hobbyking.com/hobbyking/..._FPV_Goggle_V2_w_5_inch_LCD_Monitor_Kit_.html

FPV 5.8 Receiver:
Boscam FPV 5.8G 8CH 200mW AV Wireless Receiver RC805
http://amzn.com/B00ITHBNWA

FPV Camera and Transmitter:
Eachine 700TVL 1/3 Cmos FPV System 148 Degree Camera Module With 32CH Transmission
http://amzn.com/B00WJFKXS8

5.8 Antenna:
Anbee® FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set w/RP-SMA Plug
http://amzn.com/B00LGMTTPI

Controller and Receiver:
FlySky FS-T6 2.4ghz Digital Proportional 6 Channel Transmitter and Receiver Model
http://amzn.com/B012W6HJHG

Recording:
RUNCAM HD-S 5V
http://amzn.com/B00VT065GI



Tools:

Battery Charger:
Tenergy B450AC 45W AC/DC Compact Balance Charger for NiMH NiCd LiPo Li-ion LiFePO4 Lead Acid Battery Packs
http://amzn.com/B0170VT6Q0

Heat Shrink Wire Wrap:
Anytime Tools 127 pc Heat Shrink Wire Wrap Cable Sleeve Tubing Sets Assorted Size w/Case
http://amzn.com/B008WWC6FU

Bullet Connectors:
T-Trees 10 Pairs Of Xt60 Xt-60 Male Female Bullet Connectors Plugs For Rc Lipo Battery
http://amzn.com/B00XC4NX1E

Prop Balancer:
ZJchao Precision Prop Balancer for Quadcopter and Airplane Props
http://amzn.com/B00CLX8JRA

Solder Kit:
Elenco TK14 Electronics Technician Starter Kit, 9-Piece
http://amzn.com/B0002IWF62

Elenco Soldering Iron Holder
Link: http://amzn.com/B0002LLWEU

SE MZ101B Helping Hand with Magnifying Glass
http://amzn.com/B000RB38X8

 

[Hoki]

I'm not loving the frame or the ESCs. Actually those are the same cheap ESCs you can get on aliexpress for 11 dollars for a 4 pack.
I have the flight controller and I think it's the best.
These ESCs will be way better and they are smaller and cuter
http://www.banggood.com/KINGKONG-BL...OneShot125-For-FPV-Multicopter-p-1002347.html

If I were you I'd search on aliexpress or banggood for a good frame. They have much cheaper prices anyway. This is the one I just ordered and it seems to be better than I lot I saw for what I want. It has the bottom area where you can hide all the wires and even ESCs for a clean look.
http://www.aliexpress.com/item/OCDA...-Carbon-Fiber-Frame-VZER0450/32579298648.html

 

[Hoki]

you can get the same kind of power board on aliexpress for 2 dollars but you should get a frame with built in PDB or some frames include one that will screw in on the bottom or something. My kingkong 260 frame does. That's also a good frame but it won't stand up to any hard crashes like a carbon fiber one will.

I have those same batteries for all of my drones that are the smaller ones and they are great. I can easily get 20 min. but you can get them for under 25 dollars on ebay

 

[jbrumberg]

The battery charger is a little lightweight at 45W, especially if you plan to charge a couple of 3S batteries simultaneously and for that you would need a parallel charging board (and more money expended).

Buy more props if you are a NOOB; crashing is part of the learning curve.

"Cheap" components are really not "cheap" in the long run.

This hobby can get quite expensive pretty quickly.

Good luck, fly responsibly, and have fun.

JB

 

[Hoki]

get this frame and build it with me!
[url=http://postimg.org/image/d9jlr8f1d/] [/URL]

 

[Hoki]

if you go on aliexpress you can find like a 16 pack of propellers for like 15 dollars or so. orrrrrrrrrrrrr get a kingkong 260 for 25 dollars and it comes with 2 frames and the propellers and the PDB and a tail light.