F550 with Naza and GPS....Questions

Martyf1

Member
So I flew my 550 for the first time this week and all is well (almost). RTH worked as advertised, however I have some tweaking to do as it's not quite holding position and altitude plus there's a little toilet bowl action going on. So the first question....can someone who's flying a nice stable stock 550 with 10" props post their settings like DJI does in the back of the manual for 8" props?

Second question....my intelligent orientation control won't arm. I just get a single green led flashing indicating good gps prior to takeoff but no IOC light. And no IOC when airborne more than 10 meters away. Any ideas?

Thanks

Marty
 


Benchmark

Member
I had the same problem too i can remember. I foind out that the IOC functions never worked if i powered up the craft in that mode. The trick that did it for me as to always start off in IOC OFF mode then flick the switch to the respective IOC mode want after the craft is airborne.
Can you post how you solved yours?
 

Martyf1

Member
Once airborne, I just cycled the switch to off and then back and it worked. Don't know why.....but it now works.
 

Top