matthew.wright5
Member
ARF FOR SALE:
A. Droidworx CX-4
- 3 – 6S compatible
View attachment 7908View attachment 7909View attachment 7913View attachment 7910View attachment 7912View attachment 7911View attachment 7914
Includes:
1. Droidworx V2 Polycarbonate Shell with custom Paintworx ‘Dragon’ in Grey and Black.
2. V2 Extended Landing Gear:
- Quick release landing gear (on and off in 5 seconds).
- Snap-on dual skids (packs down flat for transport).
3. Aerodynamic boom nacelles x 4 (users choice to install).
4. Flight Control Board V2.
5. Additional spare parts to supplement your build or for crash-repair:
- Includes sufficient parts to convert from X4 to X8 coax.
- Includes additional flight control board.
- Includes Arctic Silver Thermal Paste.
- Includes spare battery straps.
- Huge assortment of genuine Droidworx fittings and fasteners.
B. AXI 2814/22 Short Shaft, Droidworx Edition motors (x4)
C. Herkules II V4 ESC
- Installed with Octo heatsink.
- Latest firmware installed, firmware update cable included.
- The Herkules has been setup for the user’s choice of flight controller (Wookong, Naza recommended). Also supports Mikrokopter.
- Test run to ensure motor rotation is correct for DJI flight controllers.
- XT60 pre-installed and a quick-change XT60 battery lead (in parallel). Leads can be changed as required.
D. 4 x XOAR 13X6.5” Carbon Fibre Precision Pair Propellers
E. 6 x XOAR 12x4.5” Carbon Fibre Precision Pair Propellers
- 4 x 1045 EPP props included (used for ground testing only).
F. Photohigher CX113 two-axis gimbal
- provided with new Droidworx frame adapters for V2 landing gear.
---
NOTES:
1. Aussie buyers preferred, however all offers considered on a first in basis.
2. The CX-4 will be shipped in ARF form, and will arrive ready for installation of flight controller.
3. The buyer will need to provide the flight controller of their choice, a receiver and battery. The NAZA-M with GPS is a great FC for this craft, however the CX-4 can easily accommodate the Wookong-M, Arducopter, KK, CC3D and Mikrokopter FC.
4. A Castle Creations 10A BEC is included for Gimbal power.
AUD $1950 + shipping
Payment method: Paypal
PM me for shipping options.
A. Droidworx CX-4
- 3 – 6S compatible
View attachment 7908View attachment 7909View attachment 7913View attachment 7910View attachment 7912View attachment 7911View attachment 7914
Includes:
1. Droidworx V2 Polycarbonate Shell with custom Paintworx ‘Dragon’ in Grey and Black.
2. V2 Extended Landing Gear:
- Quick release landing gear (on and off in 5 seconds).
- Snap-on dual skids (packs down flat for transport).
3. Aerodynamic boom nacelles x 4 (users choice to install).
4. Flight Control Board V2.
5. Additional spare parts to supplement your build or for crash-repair:
- Includes sufficient parts to convert from X4 to X8 coax.
- Includes additional flight control board.
- Includes Arctic Silver Thermal Paste.
- Includes spare battery straps.
- Huge assortment of genuine Droidworx fittings and fasteners.
B. AXI 2814/22 Short Shaft, Droidworx Edition motors (x4)
C. Herkules II V4 ESC
- Installed with Octo heatsink.
- Latest firmware installed, firmware update cable included.
- The Herkules has been setup for the user’s choice of flight controller (Wookong, Naza recommended). Also supports Mikrokopter.
- Test run to ensure motor rotation is correct for DJI flight controllers.
- XT60 pre-installed and a quick-change XT60 battery lead (in parallel). Leads can be changed as required.
D. 4 x XOAR 13X6.5” Carbon Fibre Precision Pair Propellers
E. 6 x XOAR 12x4.5” Carbon Fibre Precision Pair Propellers
- 4 x 1045 EPP props included (used for ground testing only).
F. Photohigher CX113 two-axis gimbal
- provided with new Droidworx frame adapters for V2 landing gear.
---
NOTES:
1. Aussie buyers preferred, however all offers considered on a first in basis.
2. The CX-4 will be shipped in ARF form, and will arrive ready for installation of flight controller.
3. The buyer will need to provide the flight controller of their choice, a receiver and battery. The NAZA-M with GPS is a great FC for this craft, however the CX-4 can easily accommodate the Wookong-M, Arducopter, KK, CC3D and Mikrokopter FC.
4. A Castle Creations 10A BEC is included for Gimbal power.
AUD $1950 + shipping
Payment method: Paypal
PM me for shipping options.
