Aeronavics / Droidworx Droidworx AD-6 HLE 360° / Wookong M / AXI 2814/20 / DJI Brushless Controllers ??

[EDFlight]

Hi all,


I have a question about my collection ...


I'm building a Droidworx AD-6 HL 360 ° with 360 ° Pan AV130. and Wookong M


Engine: Axi 2814/20


Is it advisable to take the original DJI 30A brushless controllers?


Or would you advise me to other controllers?


I would use 4S 5000mAh lipos


Greetings


Georg

 

[vip]

Hi all,


I have a question about my collection ...


I'm building a Droidworx AD-6 HL 360 ° with 360 ° Pan AV130. and Wookong M


Engine: Axi 2814/20


Is it advisable to take the original DJI 30A brushless controllers?


Or would you advise me to other controllers?


I would use 4S 5000mAh lipos


Greetings


Georg

I use the 30amp dji esc's on my octo without any problems....I also use 4S batteries mostly 5800's...
I am using avarto 2814 motors.

 

[kjetilhansen]

Hi all,


I have a question about my collection ...


I'm building a Droidworx AD-6 HL 360 ° with 360 ° Pan AV130. and Wookong M


Engine: Axi 2814/20


Is it advisable to take the original DJI 30A brushless controllers?


Or would you advise me to other controllers?


I would use 4S 5000mAh lipos


Greetings


Georg

I belive I have the exact same setup as you, included the DJI esc's, it works fine with me, but I must admit, it's pretty scary to use these cheap motor controllers with such an expencive setup... But I don't know about any better controllers....


-Kjetil

 

[Benchmark]

Yes is very possible, I use it myself on my droidwrox AD6 with wookong and Axi motors.