DJI iOSD mark II no video. Need help.

[njheliflyer]

iOSD Mark II provlem , gray screen no video
I am new to this. Need help.

I have an iOSD Mark II that I can see the OSD data but no video. Just gray screen with OSD info.

Just to add things I have tried.
Different voltage to iOSD.
Different video cable from gopro.
Tried different camera.

I did hook directly to Vtx and i get video. So i know the problem is in the OSD.

My setup is:
DJI Naza v2 w/GPS,pmu,led
DJI iOSD Mark II
DJI AVL58 Video Tx/Rx
GoPro 3+ black

Please help.
​

 

[haha49]

iOSD Mark II provlem , gray screen no video
I am new to this. Need help.

I have an iOSD Mark II that I can see the OSD data but no video. Just gray screen with OSD info.

Just to add things I have tried.
Different voltage to iOSD.
Different video cable from gopro.
Tried different camera.

I did hook directly to Vtx and i get video. So i know the problem is in the OSD.

My setup is:
DJI Naza v2 w/GPS,pmu,led
DJI iOSD Mark II
DJI AVL58 Video Tx/Rx
GoPro 3+ black

Please help.
​

If you get the OSD info but no video that means you camera video isn't working. If it's not powered or turned on it will only show the osd info. For me I use a gopro I have to turn the camera on to get it to see the video and it's wired through the usb port you might be using the wrong cable or mixed up the video and ground between the camera.

1) The camera has no power
2) The wiring to the camera is wrong
3) Something isn't patching the video through.

Hope that helps mine is just like that till I power the gopro on.

 

[copterstudios]

On my phantom zen, the gopro was "lose" and the video signal went out.