DJI F550 NAZA GPS FUTABA 8FG Super

Status
Not open for further replies.

dr427

Trying to figure it out!
Already spec'd, built, and shipped to me only to find I have no sense of orientation and this is WAY over my head having never flown anything before! I have literally only flown it once and have decided I need to stick with ground RC stuff.

RTF DJI F550 Flame Wheel Hexacopter - $1200

Build Sheet Specs:
Futaba 8FG & Futaba R6208SB Receiver (box & warranty card included - updated to v5.0 firmware)- $480
Naza-M Flight Controller w/ GPS (firmware updated to v2.02) - $400
T-Motor MT2216-11 900kv x (6) $50ea. = $300
DJI Opto 30amp esc x (6) $20ea. = $120
DJI F550 Frame - $50
10 x 3.8 APC Props (6) = $25
6" G-10 Legs x (6) = $45
Batwing Camera mount (mount a GoPro or similar and keep legs out of view) - $20
Custom GPS antenna low profile mount (saves antenna from crashes) - $15
Custom NAZA Flight Controller box mount (keeps box in place forever) - $15
Additional Supplied Loose parts
Landing gear Skids (can be used instead of the 6 black legs) - $30
Spare red arm $10
1 meter waterproof red led strip (never installed) $3
1 meter waterproof white led strip (never installed) $3

You would spend $1500+ on this build.

NO BATTERY OR CHARGER WILL BE INCLUDED (except Futaba 8FG Transmitter has built in battery & charger)
Battery Recommendation (Buy 2) are these: http://www.buddyrc.com/glacier-35c-5300mah-3s1p.html
Currently it has 10" blades so a 3S is recommended if you swap the blades for 8" then you could use 4S batteries. It has an EC3 connector as well.

*********BONUS***********BONUS************BONUS*** *********BONUS************BONUS************
As a bonus I will include a ($125) Walkera Ladybird v1 Trainer w/ it's own Devo Full Size radio and a bunch of parts. (see last picture) It's the desirable Version 1 not 2!
*********BONUS***********BONUS************BONUS*** *********BONUS************BONUS************

Use Paypal for credit card payment or send money via Bill Me Later and get 6 months same as cash through Paypal!!! (That's what I did to buy it).

*Final Setup requires Windows and downloading the free NAZA-M Setup Assistant for programming* I have done it, but please don't trust my settings.

I have this listed on Craiglist locally as well.

View attachment 10783View attachment 10784View attachment 10785
 

Attachments

  • 3G33Fc3H75N75G15J8d3s63083c4c62081398.jpg
    3G33Fc3H75N75G15J8d3s63083c4c62081398.jpg
    47.3 KB · Views: 280
  • 3Ec3K13H15E55Kc5J8d3se4179de83cdb1925.jpg
    3Ec3K13H15E55Kc5J8d3se4179de83cdb1925.jpg
    23.8 KB · Views: 246
  • 3Ef3G43I75Kc5Fb5Mad3v20ca533a48ed172f.jpg
    3Ef3G43I75Kc5Fb5Mad3v20ca533a48ed172f.jpg
    19.9 KB · Views: 300
Last edited by a moderator:

dr427

Trying to figure it out!
Futaba 8FG Super

**********F550 Sold*********


Futaba 8FG Super 14ch TX Transmitter still available, but everything else including the futaba Receiver is now sold.




View attachment 10854View attachment 10855View attachment 10856View attachment 10857View attachment 10858

Basically a new Futaba 8FG Super 14 channel TX Transmitter Radio. I upgraded the Firmware from v4.1 to v5.0.

Used to setup a Quadcopter then sold the quad with the RX Receiver. So this is only for the TX Radio only. You can buy Futaba receivers for around $100 or get an OrangeRx for $30.

Comes with box, warranty card, manual, lanyard, charger, rechargeable battery. Was $479 new with both RX & TX.

Its been used so little it still hasn't been charged outside the factory yet.

$320 Shipped to US address ---- Might consider a trade for a comprable Ground RC Radio.
 

Attachments

  • 3Ec3J83H85Ec5K85H1d435066cf656d5a13a8.jpg
    3Ec3J83H85Ec5K85H1d435066cf656d5a13a8.jpg
    39.3 KB · Views: 346
  • 3Gf3K43N95Na5Ec5Jed43e6542c4ac0351b8f.jpg
    3Gf3K43N95Na5Ec5Jed43e6542c4ac0351b8f.jpg
    33 KB · Views: 485
  • 3K33La3N35Nb5Id5Ked436b052a5584e7152d.jpg
    3K33La3N35Nb5Id5Ked436b052a5584e7152d.jpg
    29.7 KB · Views: 326
  • 3G33F73He5L65Nf5H5d439a71facfac361cbc.jpg
    3G33F73He5L65Nf5H5d439a71facfac361cbc.jpg
    28.9 KB · Views: 249
  • 3E83K73Fd5Na5Lb5Ked43e743640818cf1355.jpg
    3E83K73Fd5Na5Lb5Ked43e743640818cf1355.jpg
    20.3 KB · Views: 439
Last edited by a moderator:


Status
Not open for further replies.
Top