amazingdiy
New Member
Flight of scratchbuilt quad at the end, enjoy!
https://www.youtube.com/watch?v=JQmFwtc0HOw
Quadcopter facts:
15x15 mm aluminum tubing and coroplast fairings
Take-Off-Weight: 4150g, It is a 1:4 scale model, could be built lighter if your goal is making a R/C quad.
Hover time: 25min with 14.8V 13000mAh
Motors: Turnigy LD3727A-1300 Brushless Motor
Propellers: 600 mm of DIY fiberglass!
Reduction: 130/20
Battery: 2x ZIPPY Traxxas 13000mAh 2S1P 30C (1400g, 34% of TOW)
ESC :40-60A (Oversized to cope with enclosed mounting)
Flight controller: KK 1.6 firmware
https://www.youtube.com/watch?v=JQmFwtc0HOw
Quadcopter facts:
15x15 mm aluminum tubing and coroplast fairings
Take-Off-Weight: 4150g, It is a 1:4 scale model, could be built lighter if your goal is making a R/C quad.
Hover time: 25min with 14.8V 13000mAh
Motors: Turnigy LD3727A-1300 Brushless Motor
Propellers: 600 mm of DIY fiberglass!
Reduction: 130/20
Battery: 2x ZIPPY Traxxas 13000mAh 2S1P 30C (1400g, 34% of TOW)
ESC :40-60A (Oversized to cope with enclosed mounting)
Flight controller: KK 1.6 firmware