Complete Heavy Lift Hexacopter / Aerial Photography Package, Ready to Fly with approx. 15 flights on all equipment.
This has used only the best components, and everything is in perfect condition. Airframe is custom designed and built from fiberglass sheet and T6 aluminum arms, and is extremely durable. If anything ever needs replacing, you can easily get the materials and at low (not carbon fiber) cost. Body FG is from McMasterCarr and arms are from Innov8tivedesigns. This airframe has been designed for easy one hatch top access and ultra simple maintenance. The Futaba TX is used for flying and the Hitec Aurora is the camera control TX; however, you can configure to control everything on the Futaba if desired. This package comes with the Sony Nex 5 camera, but will accommodate a DSLR. Flight times are 14 minutes on 10,000mah (two 5S 5000mah with 11" props). You can TX toggle between fixed FPV camera view or view through the camera lense. Camera video on/off or snapshot shutter release are on a TX toggle switch and camera uses an IR controller. Airframe arm-span is approx. 980mm. The hex flies rock solid and produces excellent video or snapshots. Has front LED lights for easy orientation. This package is a great deal for this quality and performance. Selling because my interests have changed.
Selling as a package only.
Price reduced on 3/22/15 from $2,900 to $2,700 shipped (within USA), or can pick up in Atlanta, Ga.
Includes:
-Heavy Lift Custom Build Hexacopter + one extra arm
-Avroto 2814-11S motors + one extra motor
-40A AKE speed controls + one extra speed control
-DJI Wookong Flight Controller w/ GPS (no waypoints)
-Fixed position CMOS camera
-Sony NEX 5 Camera with two lenses
-PhotoHigher AVR 200 Gimbal
-Immersion Duo 5.8Ghz 600W FPV TX and Immersion RX (RX power=12v)
-Fat Shark Dominator Goggles (plug into Immersion RX) (Goggles power=12v)
-Futaba T10CAG 2.4Ghz TX/RX (flight control)
-Hitec Aurora 9 2.4Ghz TX/RX (camera control)
-Hitec X4 AC/DC Quad charger
-(6) Flight Batteries
-Extra prop and aluminum arm paint
View attachment 23686 View attachment 23687 View attachment 23688 View attachment 23689 View attachment 23690 View attachment 23691 View attachment 23692 View attachment 23693 View attachment 23684 View attachment 23685
This has used only the best components, and everything is in perfect condition. Airframe is custom designed and built from fiberglass sheet and T6 aluminum arms, and is extremely durable. If anything ever needs replacing, you can easily get the materials and at low (not carbon fiber) cost. Body FG is from McMasterCarr and arms are from Innov8tivedesigns. This airframe has been designed for easy one hatch top access and ultra simple maintenance. The Futaba TX is used for flying and the Hitec Aurora is the camera control TX; however, you can configure to control everything on the Futaba if desired. This package comes with the Sony Nex 5 camera, but will accommodate a DSLR. Flight times are 14 minutes on 10,000mah (two 5S 5000mah with 11" props). You can TX toggle between fixed FPV camera view or view through the camera lense. Camera video on/off or snapshot shutter release are on a TX toggle switch and camera uses an IR controller. Airframe arm-span is approx. 980mm. The hex flies rock solid and produces excellent video or snapshots. Has front LED lights for easy orientation. This package is a great deal for this quality and performance. Selling because my interests have changed.
Selling as a package only.
Price reduced on 3/22/15 from $2,900 to $2,700 shipped (within USA), or can pick up in Atlanta, Ga.
Includes:
-Heavy Lift Custom Build Hexacopter + one extra arm
-Avroto 2814-11S motors + one extra motor
-40A AKE speed controls + one extra speed control
-DJI Wookong Flight Controller w/ GPS (no waypoints)
-Fixed position CMOS camera
-Sony NEX 5 Camera with two lenses
-PhotoHigher AVR 200 Gimbal
-Immersion Duo 5.8Ghz 600W FPV TX and Immersion RX (RX power=12v)
-Fat Shark Dominator Goggles (plug into Immersion RX) (Goggles power=12v)
-Futaba T10CAG 2.4Ghz TX/RX (flight control)
-Hitec Aurora 9 2.4Ghz TX/RX (camera control)
-Hitec X4 AC/DC Quad charger
-(6) Flight Batteries
-Extra prop and aluminum arm paint
View attachment 23686 View attachment 23687 View attachment 23688 View attachment 23689 View attachment 23690 View attachment 23691 View attachment 23692 View attachment 23693 View attachment 23684 View attachment 23685
Attachments
![sRngfHG8vhRNpQr5QR2X0EVjXlqy4613ofhg6FX4bzg[1].jpg](/forums/data/attachments/23/23414-ccea8a3c976fb3f9541654e3d098f8d9.jpg)
Last edited by a moderator:
