adupting 900mhz

[awod]

hello there
I just bout an ausum phantom quad copter and is soooo nice and eazey to control and oporeate.
Can adupt a 900 mhz to the quad control system.
So i can extend the range for it and get the gps positions?
If any one has tryed that please i need the help on this matter.

 

[PeterLester]

You are asking for a lot with respect to the Phantom.....
If you had larger quad or Hex c/w WooKong + GPS receiver you would have the option to use the DJI LK900 Mhz datalink Ground Control Station which will send down real time GPS positions and give you a flight range of 10 km or further if your MR batteries can handle that kind of range. Also the 900Mhz transceiver has to be used in conjunction with your existing RC receiver for safe take-off and landing.

hello there
I just bout an ausum phantom quad copter and is soooo nice and eazey to control and oporeate.
Can adupt a 900 mhz to the quad control system.
So i can extend the range for it and get the gps positions?
If any one has tryed that please i need the help on this matter.

 

[awod]

Thanks for the quick replay my frind. Yes the phantom is too small fo.r that! !
Can you advice me for a complete system like you mintined before. or at least a link for that?

 

[gtranquilla]

Try the DJI F550 ARF....... which I have successfully flown c/w Futaba RC receiver in addition to the DJI Innovations LK800 Ground Control Station. But keep in mind that you might also need the WooKong M controller c/w GPS sensor unless DJI has enabled their NAZA V2 controller to allow for the GCS capability by means of LK900 900Mhz datalink. http://www.dji.com/product/wookong-m-waypoint/

Thanks for the quick replay my frind. Yes the phantom is too small fo.r that! !
Can you advice me for a complete system like you mintined before. or at least a link for that?