I only have 3 flying sessions on this build. The only reason why i'm selling is because i love my mini's and i'm going to be testing a new mini frame over the next month or so and will not have any time for this big boy quad. It's a really clean build and very lightweight. On 4s... this thing is a rocket for those sporty acro flying days, yet incredibly stable for shooting AP/AV for the days where you want to enjoy the scenery. This is one of the toughest quads out there. I did have 1 hard landing on my maiden flight, and all that broke was the vibration bobbins (exactly what it's suppose to do). Back up in the air after 5 minutes.
Build log is here: http://www.rcgroups.com/forums/showthread.php?t=2032946
The VTX and and UHF rx are NOT part of the sale. Here's what's included:
-ADS400Q frame
-Extra arm and landing gear
-Afro 30a simonK ESCs
-Sony CCD 600tvl FPV cam (same as the PZ cam but with IR filter)
-Acro Naze32 rev4 white board with buzzer and voltage monitoring, also has bluetooth pins soldered.
-1 set of either HQ 8x5 props, 1 set of carbon/nylon SF 8045 props, or one set of APC MR props. Your choice (or I can sell you everything I have for extra cost so you can try out which is best for you)
-Your choice of D2836-1100kv motors, or an extra $25 bucks for almost new x2216-1250kv motors
Just add your rx of choice, your own vtx, bind and fly.
I can ship it partly dis-assembled to save on shipping, or I can ship it all put together... up to you.
She flies great with the 1100s and APC MR props, lots of "pop" with these motors. The roll and pitch is tuned perfectly, but still need to do some fine tuning on the yaw IMO. I'm sure it can be dialed in within 1 or 2 more lipos.
Here's the latest flight on this with the 1100 motors and APC props. You'll see jello on WOT... this is due to unbalanced props/motors.
https://www.youtube.com/watch?v=SnVVH7avjSA
And here's a video showing that even with the unbalanced props, you still can get smooth video even with a mobius (same motor/props).
https://www.youtube.com/watch?v=hV_9Wq4iBb0
$320 PLUS shipping... please contact me at ummagawd@gmail.com as I don't frequent this board.
Build log is here: http://www.rcgroups.com/forums/showthread.php?t=2032946
The VTX and and UHF rx are NOT part of the sale. Here's what's included:
-ADS400Q frame
-Extra arm and landing gear
-Afro 30a simonK ESCs
-Sony CCD 600tvl FPV cam (same as the PZ cam but with IR filter)
-Acro Naze32 rev4 white board with buzzer and voltage monitoring, also has bluetooth pins soldered.
-1 set of either HQ 8x5 props, 1 set of carbon/nylon SF 8045 props, or one set of APC MR props. Your choice (or I can sell you everything I have for extra cost so you can try out which is best for you)
-Your choice of D2836-1100kv motors, or an extra $25 bucks for almost new x2216-1250kv motors
Just add your rx of choice, your own vtx, bind and fly.
I can ship it partly dis-assembled to save on shipping, or I can ship it all put together... up to you.
She flies great with the 1100s and APC MR props, lots of "pop" with these motors. The roll and pitch is tuned perfectly, but still need to do some fine tuning on the yaw IMO. I'm sure it can be dialed in within 1 or 2 more lipos.
Here's the latest flight on this with the 1100 motors and APC props. You'll see jello on WOT... this is due to unbalanced props/motors.
https://www.youtube.com/watch?v=SnVVH7avjSA
And here's a video showing that even with the unbalanced props, you still can get smooth video even with a mobius (same motor/props).
https://www.youtube.com/watch?v=hV_9Wq4iBb0
$320 PLUS shipping... please contact me at ummagawd@gmail.com as I don't frequent this board.