A fresh overview and Depth Walkthrough of WKM

[DJI Innovations]

A fresh overview and Depth Walkthrough of WKM. Maybe a little bit late, hope could help some of fresh guys anyway


Presented by Colin, DJI USA


Wookong M Overview CH 1 Components and Functions 1
http://www.youtube.com/watch?v=b5KdiW2X6QI


Wookong M Overview CH 2 Recievers 1
http://www.youtube.com/watch?v=TJEVAAMv2zM


Wookong M Overview CH 3 Flight Modes
http://www.youtube.com/watch?v=MYwiMNbOBIs


Programming the Wookong M CH 2 Software Overview
http://www.youtube.com/watch?v=9RFyzG1GjdA


Programming the Wookong M CH 3 In Depth Walkthrough
http://www.youtube.com/watch?v=nKGCJVYsdQE

 

[mbsteed]

Good Stuff. The quality of the video is great.

It sounds like there are other videos that aren't listed here.

One suggestion: - the mounting screen with the numbers needs more clarification. I find that diagram and onscreen explanation extremely vague and confusing - wether to use positive numbers or negative numbers. The video explains one axis but not the other axes, that always seems to be point of confusion and little wonder when you look at the screen, one can interpret the diagram multiple ways - what is the orientation of ship (arrow), etc. If I could make a suggestion to the software designers, why not put an actual picture of a multirotor there rather than a vague image of an arrow and label forward, back, left and right, etc.

 

[PeterLester]

Very professional video work and clear voice annunciation. Just one question... At 30 seconds into this video "Programming the Wookong M CH 2 Software Overview", the IMU coordinate configuration shows a "-6" for the z axis. How is this determined and/or why is it not zero? I get the impression that this value represents the distance between the motor thrust plane and the vertical position of the IMU but this is just a guess and there seems to be no specific directions to define this number in the software help screens or the manuals.

 

[janoots2]

You calculate the IMU values in relation to your craft's center of gravity, not the motor plane. There are a bunch of threads and even some good videos on this forum to help you.

 

[hover.ch]

Well done!

I would appreciate such an in-depth introduction for Ground Station as well. IMHO, the GS manual is pretty unreadable and there are many questions left.
Do you plan something on GS?

 

[PeterLester]

Yes.... Colin.....more detail on the Ground Control Station would be most helpful...... It's a bit scary to have to give up control with a conventional RC transmitter and switchover to a keypad and mouse!!!!! Also I am surprised that the manual suggests disconnection of all escs and the GPS so that simulation training can be done more safely.....

 

[mmurfitt]

I'll add my tuppence worth...
Can't wait to watch the videos when I'm at my Mac.
I too would love to see something comprehensive on GS, come on DJI, Show Me The Money!


Sent from my iPhone using Tapatalk