drone sensor

Benewake TF03 LiDAR can directly be connected with the serial port of Pixhawk. TF03 can be used in flight device for the purpose of altitude holding or obstacle avoidance. This document is suitable to Pixhawk adopts ArduCopter V3.6.2 or higher firmware(Note:Standard output mode should be used...

Drone Altitude Holding The product is installed underneath drones to realize real-time data probing of drone height. After obtaining and processing the data, drones will make adjustments to keep stabilized flight at the same altitude, to realize the result of terrain simulation flying Drone...

LiDAR is an acronym for “light detection and ranging,” (sometimes Light Imaging, Detection, And Ranging). Like sonar and radar, LiDAR relies on the same principle: echolocation. Although it sounds like Star Wars space science, echolocation has been around for millions of years and happens to be...

Benewake launches CE30, a solid-state LiDAR with large FoV. It could simultaneously output grey and depth information within 132° horizontal FoV and 9° vertical FoV. Meanwhile no mechanical rotating components exist internally, so higher reliability and stability could be ensured. Based on the...

UAV time-lapse photography It's amazing game is using the function of interval shooting in drones, long video compression in a very short time. There are three routines! 1. Build This set is all good composition, hovering, activity union! 2. Mobile time delay This set is all quiet...