Search results

Hi Patrick, I'm using the settings from the DJI website for my F550 and it flys much better. . Cheers Paul

BTW. I'm also having major wobble problems on my ADX-3. I'm in India for two months so won't be able to recheck settings till mid April.

Hi Guys, I tried a return to home on my CX4. Bloody near lost the whole thing!! Video here: https://vimeo.com/32381525 The thing is that I took the CX4 to India with all the exact same settings and it performed faultlessly there. No toilet bowl, and return to home worked twice in a row with no...

No it is most certainly not just you. Kim is having GPS problems with his own Helicopter. DJI needs to step up and address this problem asap on what is otherwise a very good flight controller. Someone in Palm Springs USA is also having the exact same problem.

When you say "I had no issue with weight with the stock props", by "stock props" do you mean the 10"?

Thanks for that feedback. I'm going to try the Graupner props and see how I go.

So maybe I just got super unlucky to have two snap in the course of two weeks??? I'm using the NAZA FC on my F450 and with standard gains and 8" props it's just 100% fun to fly. Very, very stable. But I want to add the GoPro and FPV gear, and the 8" props are struggling a little to lift the...

Hi Gary. I'm interested to see you using Graupner props on the DJI motors. Do they fit right on without modification? I've had two spectacular crashes on my Naza F450, both times caused by DJI 10" props snapping during flight. All up weight during both flights was 1.4Kg. (GoPro 2, FPV gear). Has...

Hi Ken, What settings did you end up with on your AD6? I'm currently battling to stop the wobbles on my ADX3. I'm currently on 160% for Pitch and Roll, and 180% for both the Attitude gains. I haven't touched the advanced parameters as yet. By the looks of your previous post, I need to wind my...

I don't understand what you mean "Compass calibration needs to be done on the airframe and not location". The Wookong user manual clearly shows how to do the calibration and this is exactly how I've been doing it. I've taken off all FPV gear and it's made no difference.

I have a friend in Auckland who seems to have GPS working on his Wookong Quad. I'll get in touch with him and see what settings he's using. Regarding the magnetic declination, it seems to me that DJI ould program the GPS to function normally in NZ. I mean, every other GPS device works fine.

I'm getting GPS lock on my iPhone no problem. I haven't heard of a recall on DX8. I'll check with my supplier here in NZ.

It's interesting that you were having the same problem in the US. I thought the problem only manifested in NZ/Australia. Did you write to DJI?

Yes it seems that it's something DJI has to sort out. I mean, what the hell are we supposed to do??

Hi. I already have failsafe and the three position switch all set up and working. Kim from Photohigher set it up for me just after we installed the Wookong. When I turn off my DX8 I get a constant blue LED on the Wookong. But as for the GPS......crap.

Hmmmm. I went outside just now, did the compass calibration, waited till no red flashing light, took off in GPS mode and it immediately drifted 50 mtrs away before I brought it back. Tried again and got anti-clockwise circles. :-(

Hi Andy, Sadly no. I wrote an email to DJI expressing my frustration weeks ago but no response. Of interest is that the CX4 was doing the anti-clockwise circles in NZ, but without changing a single setting, it performed very well in India??? Figure that out! I currently have an ADX3 HL with a...

Wow! 16 minutes! We are getting about 8mins max out of CX4 with GoPro mounted and 4S 4500 LiPo, using the 2217 Axi motors. Our first flights were with APC 11x4.7 props but we found the motors were getting VERY hot. Couldn't hold your finger on them for more than a few seconds. We installed...

I saw this video on YouTube, but it's using a different Radio Tx. I was confused after watching it but thanks for sharing this.

Cheers Dave. Where do I buy the Graupners? Paul