Search results

Does anyone know if there is anywhere in the UK where i can get tarot spares? i had a little crash today when i switched in to stabilize mode part way through descending in alt hold mode, throttle was low and the thing dropped out of the sky from about 2 metres. i was lucky & just took out a...

I have just ordered a 1 metre length of 10mm od x 8mm id from EasyComposites here in the UK, which should be a little stronger as it has a greater wall thickness, it should be delivered tomorrow so i will replace both the feet with some of this, might add a few grams, but i think its a...

Thanks Moto, I have just taken it out for another attempt, this time to analyse the vibration, took off relatively easy and got up to a hover about 2-3 metres off the ground, everything was looking good, hovered there with pretty much no additional input required to hold the position, just a...

Success!! I tried a launch last night after i got home and managed to get a hover but still had to apply a fair amount of correction to the roll and pitch to keep it level, so i landed it and took it back in side (it was getting late and didn't want to upset the neighbors) i had a quick look at...

Thanks guys, i've only just noticed these replies here and now i have most of my parts, i have changed a few things,and now have changed to Zippy Flightmax 3s1p 8000mah batteries and turnigy Multistar 4822 690kv motors, I also decided to buy some cheap plastic 12x4.5 props. Motopreserve: as...

Thanks Ben. I've started a thread over here : http://multirotorforums.com/threads/tarot-680-ironman-hexcopter-build-a-few-questions.22404/ Any input would be appreciated.

Thanks Bartman.

So once Christmas is over and done with and i can justify spending another £ 700+ on more "toys" I plan on starting a build of a Hexcopter based on the Tarot FY680 IronMan TL68C01 frame, so far I have put together a list of what i think would make a reasonable setup, pretty much everything comes...

Hi Everyone. I'm Ryan from Bristol, UK. In the new year I'm planning to start the build of a Tarot 680 Iron Man Hex and figured that theres only so much you can learn from Wiki's and basic tutorials, so here I am. Initially I will just use it as a hobby then once I have the hang of it then I...