Search results

Anyone know where I can purchase a Wi-Fi module for Phantom2 Vision Plus? does DJI carry this part? Thank you!

Enzo6212, I myself am thinking about purchasing the Immersion Vortex 250 pro. I can't seem to find any good information on this forum. I thought RMRC ( Ready Made RC) said to go to this forum for questions, perhaps not! I know Ready Made RC is a number 1 tier for help for the Vortex, soon as I...

This is what was wrote to me on another forum explaining why I should go with a Naze32 Acro "Just use caution when going with the CC3D...it's had a rocky last several months from a development standpoint, and can be difficult to get support on if you have an unusual configuration. It was a great...

Hello everyone, and good day!, I want to build a 250 FPV racer, I am having conflicting thoughts on which FC to use. I have heard the CC3D is on it's way out and I should use a Naze32 Acro. so, I would like to get everyone's thoughts and opinions on both Flight Controllers. I use a Spektrum DX7...

How about this frame "QAV250 G10 Mini FPV Quadcopter" from Lumenier. http://www.getfpv.com/multi-rotor-frames/qav250-mini-fpv-quad/qav250-mini-fpv-quadcopter.html

We have more cows in Osceola County than we have people. makes for good places to fly.

Yes that is what I was saying John. I finally got that figured out. Now I can't get my flight controller or transmitter to communicate.

hello Bartman, I have the ESC problem fixed. My problem is now the flight Controller 'HoverFly Open". I have all the esc wires and receiver wire hooked up to the FC. When I turn on the transmitter then the battery to the quad it just beeps, and the FC flashed a purple LED light (should be green...

violetwolf, I finally got the ESCs calibrated. I didn't need to hook the FC in order to test the ESCs. Thank you for your advise. I had to do a throttle range test first with each ESC. Not all advise on this or other forums is the right advise. I am new at building and if I have doubt or...

Excuse me guys for butting in, but I am having problems with my ESCs. I am just trying to check the rotation of my four motors. When I plug the signal cord to the receiver and hook up the three wires from the ESC to the motor, turn on the transmitter, and lastly plug in the battery all that...

Not that this will solve your problem Quan, but within my experience you are suppose to turn on the transmitter first and then the battery. You stated "I plug in batt and turned on transmitter", it seems after you rebind it would work.

I just want to check the rotation of the motors. You don't have to have the FC hooked up in order to do this. All you have to do is hook the receiver cable to the throttle of the receiver, connect three wires from the ESC to the motor, turn transmitter on with the gimbal in low position, hook-up...

Hello everyone, Could anybody explain the steps you take in doing a "continuity check" with a multi meter on a ESC? Thanks and have a great day!

violetwolf, I don't even have my FC hooked up yet!, I am at the step of the build where I just want to configure the spin to see what way the motors are spinning. According to the instructions of the build here is the link. http://www.learn.parallax.com/step-23-configure-spin-direction-motors...

I don't think the calibration of endpoints has to do with my ESC's problem violetwolf., but if you could enlighten me on how to calibrate the end points I would give it a try. If you are referring to moving the gimbal sticks in a + shape moving from left to right, then up and down, that doesn't...

Yes you did, I appreciate your help, at least I can rule out that step. I am thinking they are bad ESC's, as I re-soldered them all because the companies tech said it is likely cold solder joints. They still don't work, but they are getting power to the motors as I see them jerk a little and...

Thank you for explaining the procedure fengshuidrone. Yes I did do what you explained, but when I go back and hook-up the ESC and start it to see what way the motor is suppose to turn it goes back to rapid beeps (motor just beeps & jerks a little).

Yes! sorry I must have had my "shift key" down when I was typing 3. fengshuidrone, do you mean bind? as the ESC's are preprogrammed. I did bind the transmitter to all of them at once. I do believe binding only has to do with the receiver though. I don't understand when you wrote "calibrate them...

Hello all, I am building my 1st multi-rotor. # of my 4 ESC's are not working, all I get is a beeping. My question is there a way to check and see if my ESC's are bad? Thank you for your time. T.W.

Mark I went to the Yuneec webpage to order Typhoon Q500+ it won't let me, what's up with that? Says "coming soon" and give two prices.