Search results

  1. W

    DX8 Gear Setup Channel for 3-Way Camera Switcher

    In Heli mode, the 'Gear' switch is called 'Mix' or 'Mix/Hold'. Personally, I setup all of my multirotors in the DX8 in 'Airplane' mode. Multirotors do not need any of the mixing specific to helicopters, and the heli mode makes it a bit more difficult to use some settings.
  2. W

    AV cable

    The same site that you linked to (ReadyMadeRC.com) sells a 10' (3-meter) version of the same cable. ;) http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_67&products_id=383
  3. W

    Connect 10AWG battery cable to XT60 connector

    I would stick with the smaller connector (XT60). I'd do what Bartman suggested, when you strip the wire for soldering, use the teeth of one of the smaller gauges. Try 10, and if that doesn't fit the XT60, go with 8. You are only 'cutting down' the diameter of the wire just before the solder...
  4. W

    Can I get a little Gopro 3 to Fatshark connection help?

    Glad you found it helpful. Personally, I would not remove the battery from the GoPro, and that's what I meant when I said 'not recommended', as in, 'don't remove the internal GoPro battery'. I would just use the GoPro internal battery and forget about the power output on the transmitter. Your...
  5. W

    Can I get a little Gopro 3 to Fatshark connection help?

    Yes, as you said, you need to cut off the 3-pin servo connector from the GoPro cable and splice the corresponding video, audio, and ground wires together. Whether you connect the GoPro audio cable to the left, right, or both input pins (or none at all), on the receiver is up to you - you can...
  6. W

    How NOT to fly a hexa DJI

    I've been to Brazil several times and speak a bit of Portuguese. From the description of the video, it seems that this guy is a professional that was hired to record the grand opening of a new stadium called "Arena Castelão". Looks to me like it was a non-event for those present. The cops are...
  7. W

    Hyperion 6s problems from day 1

    Thanks. Nice looking case - I'll have to look your build up...
  8. W

    Hyperion 6s problems from day 1

    So Kloner, what is your charging rig like? Power supply? Or is it more like, 'what are your charging rigs and power supplies like'? ;) Inquiring minds want to know... I think I'm due for a 2nd charger and upgraded power supply.
  9. W

    That's the reason they invented FPV.........! ! !

    Cool videos. They have an eye for production. Noticed that they flipped the image horizontally of the Graupner Trx at 0:41 into the 2nd video. I wondered why, so I played it back at full speed and figured the reason was to make a distinct cut/transition from the shot of the first controller to...
  10. W

    DGI 450 build What soldering iron

    I've owned a few different irons. This one is fantastic: https://www.sparkfun.com/products/10553 Better price here: http://www.amazon.com/Hakko-FX888-FX-888-Soldering-Station/dp/B004M3U0VU There is also available overseas in a 220v version. If this is your first iron, then a cheap 40-50w...
  11. W

    More bad news, Droider's shop fire

    That's terrible. :( Sorry to hear about it Droider. Here's hoping for a complete and speedy recovery, and to the build logs and videos of the new adventures you'll surely build over the next 30+ years. :)
  12. W

    Graupner props

    Yikes! The Graupner 9x5 is my prop of choice. Seems I'll have to be extra careful with the ones I have.
  13. W

    Thread Lock

    The type of thread lock to use totally depends upon the application, including the desired bond strength, the equipment's operating temperature range, the diameter of the bolts, and when in the assembly process you apply the thread lock. Generally speaking, blue thread lockers are medium...
  14. W

    Charging batteries in the car

    Charging through the cigarette lighter is NOT a good idea. Those plugs are typically fused at 5-10 Amps and their wires are very thin. I don't know about you, but I routinely pull 15-20 amps while charging a single battery. The other issue is fire. I recently saw some pictures of a charging...
  15. W

    Failsafe question...

    Sounds OK, and it probably doesn't matter, but I would set it so the throttle is at 0 and the other sticks are centered. FYI, the NAZA's failsafe will NOT shut the motors off after landing. You have to do that yourself via one of the CSC's, at least that is how it works with "intelligent...
  16. W

    Futaba 8 FG or Spektrum DX 8 or Graupner MX 20?

    I bought the Spektrum from a recommendation and hadn't looked at many other 6+ channel radio. Back when I used to build & race r/c cars, I always bought Futaba. I bought a Spektrum DX8 which came with a telemetry module. I never thought I'd use it, but I do, and I love it. Other than battery...
  17. W

    Line loss help (voltage calibration )

    The line loss is the difference in voltage between low & heavy load (i.e. how hard the motors are working). I use 0.4 volts as the loss number for my 4S batteries. My data logger indicates a 0.4 volt drop going from a stable hover to a fast climb; stable hover voltage 15.8, immediately go to a...
  18. W

    Naza failsafe

    Sounds like you have it right. >>"how do you set the receiver preset to engage the naza failsafe? thanks..." It depends on the receiver. Not all receivers can do this. You will have to read the receiver's instruction manual. This feature is called "Pre-set Failsafe" by Spektrum. Not sure...
  19. W

    Naza failsafe

    Sounds like you are talking about two separate things as if they are one. There are two failsafes: 1. The NAZA's built-in failsafe 2. Your transmitter/receiver's failsafe The NAZA's built-in failsafe is triggered by a switch on your transmitter. Your transmitter/receiver's failsafe is...
  20. W

    DX8 mix - help needed

    Thanks for the info! For what it is worth, that is almost exactly how I have my NAZA setup. The reason for my question about the WK-M is the picture shown in the WK-M manual. I thought some type of elaborate mixing would be required to pull this off, and was interested in learning how to do...
Top