Search results

Build Update! Ok fellas, time for a major build update! Here is my up to date build sheet, with parts and research links: https://docs.google.com/spreadsheets/d/1qEV0lTbWkm7wlAUKEOVeXszXyfQaslDTPBFDIrf95lc/edit#gid=0 I have almost ironed out everything on the Night Ninja, including GPS...

I don't need to, but it would be nice since my voltage sensor and my Taranis can both report all cell voltages to me on screens. This would be useful to monitor the health of my LiPo's and ensure they are receiving a balanced charge and discharge. Otherwise, it is not needed. My main reason for...

Thanks for the feedback, I am running the Mw2.3 out of the box from Paul at R2Fly quads. I'll look into the updated GPS software, and WinGUI versions to start. Cheers!

That is a good recommendation, however, both of the devices I have listed require balance port connections. My questions ins't whether I should use balance connectors, it is how to use two of them without modifying all my batteries? That being said, I could find a way to convert the LC filter...

Hey all, I have a quick questions about powering multiple things from a single balance port connector on my 4s quad setup. I am trying to keep everything localized to a single battery pack and currently run my X8R receiver, 600mw Tx, speed controllers and camera from my main connector on my 4s...

Hello all! I ordered this FrSky voltage sensor without fully researching my needs. It is NOT compatible with the 8XR SMART PORT, but will work as an analog voltage sensor for other applications. I picked it up on ebay, and would like to re-sell it for $10 including shipping to anywhere in the...

Hey all, I would like to ask some probing questions to those of you successfully working with MultiWii 2.3 and the Return to Home function. I have my switch programed to the RTH flight mode in the 2.3 GUI, but when activated during flight on my F450 quad, it just sort of picks a direction and...

Props! Already ahead of you on that one, but I am only stocked up on 8045's. Would anyone strongly recommend 9's or 10's, and if so, for what reasons and benefits? Also, since those reading this thread may have experience with OSD's as well, can anyone tell me if my Whitespy KV Team MinimOSD...

I should know better than to question those with experience by now... You were on the money, it just needed some more power. I am running it off my 4s at about 16v which is working just fine! Thank you, Cootertwo! It is FPV time!

https://www.youtube.com/watch?v=9pUbi3E3m9A#t=442 That was the one! Thanks for the reminder!

I have a quick question for you DJI experts. After a light crash, one of the gold solder pads popped off my integrated circuit board. Does the circuit run through the board, or is it only laid on top, covered by the black enamel? I would like to know if I can drill through the area the pads are...

The 5-15v spec was said to be for my camera, not TX; however, I will definitely check that out!

Their site specifies the input voltage range from 5-15v, but I could try it on my LiFe 10v to be sure it isn't problem.. I'll report back later. :-)

I did some further testing when I got home this afternoon, and it appears that my Goggles are defective... Here are some pics of my setup, and what I see once I power on the Immersion TX on the correct channel, with AV out from the goggles. This is exactly what it looks like in the goggles as...

That sounds very probable. I will take a photo of my Cam and Video TX setup when I get home to share it for review. I have not tested the FPV camera on any other sources yet either, so that will be on the checklist.

I have matched the channels already, as I described. I tried two separate Immersion frequencies on band 4, both resulting in the White Screen when I put the SkyZones on that channel as well. :-/

Hey all, I seem to be having an issue with my SkyZone Goggles. The built in camera works great, and the image is fine in the goggles, however, when I switch over to the channel my Immersion RC 600mw Tx is outputting on, all I see is a pretty white screen. If I change the channel to an unused...

That doesn't sound too difficult, and I remember reading about it somewhere, but not with reference to setting a RTH switch, so thank you very much! I will give that a crack next flight. Do the failsafe settings save in the Rx once locked in, for future flights?

I think I have got it now... I have failsafe set to throw switch SF, which is my GPS Home toggle (working in MultiWii GUI but not tested on the field yet). I also followed along as best I could with Scott, and I think I have set up some simple expo curves for throttle and rudder. I just wanted...

This is exactly what I would like as well, on switch SF. Can you tell me how this was done with a mix, or in C9X? I have GPS Home set to SF already, I just want failsafe to mimic that switch function, when the transmitter is turned off.