Search results

Has any one try this Large PDB any feedback ? Description: This is a large PDB for 4-6 arms big drones, internal wiring for 4 to 6 ESC signal, compatible with 6S or 12S LiPo power distribution, with stand upto 480A current. Default with 6x XT90 connectors for ESC power distribution, 2x XT60...

Has any one done a build using DJI E5000 propulsion system looking at power distribution options, one that come to mind is the power distribution from the Matrice 600, voltage 12s, but I suspect amps draw may be too much to handle the E5000, any ideas? tanks

Hi Im selling my spare set of new 2 pairs of Carbon Fiber folding propellers 2 CW and 2 CCW they are very well made and balanced they screw directly to the Inspire 2 motors no more dealing with DJI plastic props that rattle or wear out, no more need to install or un install propellers just un...

Hi guys I a selling a large flat case for a octcopter or similar, it is a custom build using top quality components it will accommodate 450mm, 500mm, and 550mm booms copter the case has 2 strong casters, 5 horizontal handles, 2 vertical handles, and 4 latches it is in very strong like new...

Hi to all im working on a project that uses a well establish and experience post house in Germany they are having serious issues apparently for broadcast from the Inspire 1 footage bellow is the explanation from the senior editor please take a look. also at the bottom, 2 links from another forum...

Anyone flying ZM interactive Xfold frames that could give an independent assessment thanks

I'm selling 8 BRAND NEW in-sealed factory box Tiger Motor U5 motors, These motors sell for $125 US in most places They are brand new, each box is still sealed from the factory, I only took the wrapping off 1 box to show how the motor comes in the box I have another set of these same U5 motors...

In an effort to find the best performance out of a custom build coax 8 copter I have been looking at ways to increase its efficiency performance, the copter flies nice but the bottom motors are slightly warmer than the top my understanding is that the bottom motor works a little harder than the...

I want to share my last attempt at getting technical support from DJI By all means I want to be objective and fair Im not in to bashing or complaining with bad or bias intent I like DJI and I admire DJI products but here it is: My question to DJI in short was and is still is: A better way to...

Im selling 8 BRAND NEW in sealed factory box Tiger Motor U5 motors, I am selling them because I change direction in the copter that I was building them for, Im asking $695 for the 8 motors. They are brand new, each box is still sealed from the factory, I only open 1 box to show how the motor...

Guys I wanted to cross reference the flight times some of you guys are getting with your setups a respected member from another forum mention that with the same motors but with Microkopter BL3 and MK FC he was getting way more time in the air Im currently flying a CS8 coax frame with T- Motor...

Hi im flying successfully a coax 8 copter with DJI A2 electronics i need advice on fine tuning the motor mixer the reason is that the bottom motors are warmer than the top motors making me to asume that the bottom motor is working harder or pulling more amps than the top motors I have already...

Can a dji zenmuse h3-2d be upgraded to a h3- 3d ?

To all X8 Coax setups experts questions: 1 Are you using DJI x8 (Octo-rotor X) mixer as it is, Top props counter clock rotation, bottom prop clock rotation? or are you modifying this setup 2 Are you using same size props for top and bottom motors? 3 Do you know why in the advance motor...

The A2 gives the user trough the Assistant software the option to adjust parameters in the advance motor mixer window assuming that the default is the general way to use it the default is set 0% I wonder what 0% means? Mikrocopter FC mixer window had values of 64 and -64 across all of the...

I will be testing new T Motor T40A Pro Esc with T Motor U5 up until now I have been using Maytech ESC with Simonk so I need advice on the settings any help and advice would be appreciated and of course it will be a big learning and understanding more of how ESC work Thanks T-Motor LED ESC...

I have a SJ8 with the following components Motors Tiger Motor U5 ESC Maytech 65A Opto Power hungry Dist Dji A2 FC The copter has been flying well but over the weekend I experience a motor not starting #3, it only jitter, after several atempts disconnecting and reconnecting the 3 ESC wires it...

Hi guys I a selling a large flat case for a Cinestar copter or similar that I don't need any more, it was custom build for me using top quality components it will accommodate 450mm, 500mm, and 550mm booms this is the true solution for taking your copter on the road with out taking it apart the...

Are there any restrictions on flying in Portugal, Spain and Italy Im planing a trip and want to take my small Discovery w/ a Gopro, apart from exercising common sense and good flying judgment Thanks

Guys I would like to ask your opinion on the current options for mounting a Movi to a Skyjib frame Vi or V2, I know of the Eco Mount it works and its for the CS gimbal and or AV200 I am guessing it will work with a Movi too but with the recent release of the very clever and simple design Toad...