Search results

I don't think the Sony Nex cameras give standard video out. There are adapters available such as - http://mikrokopter.altigator.com/micro-hdmi-to-analog-converter-for-sony-nex5-nex6-nex7-series-p-41386.html so you may be just one step away from success.

I've done the calibration but won't allow a loss that high to be set. I'm beginning to wonder if I have a problem with the power to my ESCs.

I'm getting the flashing yellow light and then almost immediately the flashing red light. The battery settings are set to 15.2 volts which is 3.8 volts per cell for a little safety margin whilst I'm testing. The problem seems to be that there is the 3.5 volt drop on takeoff and when the machine...

Thanks for the reply. I don't have per cell telemetry but I have a second set of batteries and it happens with them as well. The internal resistance of the batteries is between 15 and 20 milli ohms which seems good enough.

I am trying to convert a Droidworx AD-8 HL with a Microkopter controller to an AD-6 HL with a DJI Wookong controller. I am using the same motors and batteries with Afro ESCs. The problem is that as soon as I take off the low battery cuts in and it lands again. The telemetry shows a 3.5v drop...

Problem solved. When I installed the new board a lot of the settings were changed. One of the things changed was, the receiver type which went from Jeti to Graupner. All I had to do was change it back. All the best John

I have just upgraded with the new sensor board but the telemetry has stopped working. I am helping a friend with his Mikrokopter. It has a Jeti Mikro Kopter 2 receiver with a Jeti Box Mini on the transmitter. Up to now it has been working fine but after the upgrade it just sits there saying "MX...