Search results

  1. A

    DJI A2 Hands-on

    Yesterday we flew both the wookong m and the A2 off sore in VERY gusty winds. The A2 held up VERY well, the Wookong was very impressive and done a very good job, but I have to say the A2 was superb. Has anybody ever tried configuring either the Wookong or the A2 on a 8x prop H frame? Can this...
  2. A

    WKM>Z15>iOSD>AVL58 frustrating and intermittent error

    We have has something like that happening to us and found it was a poor contact to the Antenna. Also if you can try bypassing the iOSD and have the AVL58 TX connected straight to your video source to rule out the TX of the iOSD first.
  3. A

    DJI A2 Hands-on

    Oh I should mention we are going to fly the A2 off-sore in two days and are expecting high winds and gusts (Scotland) so will test the A2 to the MAX. I will update with results.
  4. A

    DJI A2 Hands-on

    A2 Update, Since the release of the V1.2 we have had the EVO flying for many hours and we are VERY impressed. The stability in gusts is fantastic. We have lowered the Voltage warning to a silly 18V and installed a Voltage and current monitor (Jeti MUI200 EX) and use this as our warning. This...
  5. A

    DJI A2 Hands-on

    Still not had any reply from Dji regarding the above issues. Today we have a new one. In Alt mode we are getting 2x continuance green flashes and in GPS mode 2x Blue continuance flashes. The small status LED next to the USB port is red (indicating abnormal). Nothing has changed with the system...
  6. A

    DJI A2 Hands-on

    We have been using the A2 for a few weeks now, two issues are concerning us. 1:- We have set voltage first level protection to LED Warnings & GH - Landing, When the A2 enters this mode the S800 EVO has stopped it's coarse, lowered the landing legs, hovered for a while then slowly descend. About...
Top