Search results

The red is the front. And yes, Rook, my props should be spinning in that order. For calibration... I increase throttle to 100%, connect battery to pixhawk, observe flashing lights on FC, disconnect battery, reconnect battery, listen to loud squacking noises on pixhawk, push the arming button...

I don't think that this is the right hobby for me... :( I put on a new set of ESCs and a new motor because the one burned out. Here is a video of my latest flip on take off. Please help! I feel like a complete failure! I think that the props are spinning in the right direction for the PixHawk...

I set it up according to this image - http://planner.ardupilot.com/wp-content/uploads/sites/5/2013/12/quads_PH-300x140.jpg front right - CCW front left - CW Rear left - CCW Rear right - CW Is that wrong?

Can you look and see if these props are on properly? Don't mind the missing nuts on the upper two motors. - i lost a nut on the last run in the grass. The other one is in my pocket on my way to the hardware store. http://youtu.be/aSu-tY3s-FM I mounted the prop as follows... 1. Motor 2. Prop...

Thanks for the suggestion. I mounted the battery and took it out to the grass. I gave it throttle quickly and it completely flipped. No air!

The ESCs are strapped to the same arm as the motor. Hopefully I didn't make that mistake!

I think I did.. I props spinning in the beginning of the video to make sure I did connect them correctly.

Same thing happens when mounted to landing skids and battery is center mounted.

Hi Team! I am new to hobby and in the middle of building a new quadcoptor. Here are the specifications. DJI F450 Frame HobbyKing 30A BlueSeries Brushless Speed Controller ZIPPY Flightmax 5000mAh 4S1P 30C RTFHawk (PixHawk clone) SunnySky X2212 KV980 II Brushless Motor FRSKY TARANIS X8R...